Difficulty

Moderate

Steps

6

Time Required

                          10 - 15 minutes            

Sections

1

  • Ribbon Cable
  • 6 steps

Flags

0

  • History
  • Save to Favorites
  • Download PDF
  • Edit
  • Translate
  • Get Shareable Link
  • Embed This Guide
  • Notify Me of Changes
  • Stop Notifications

Introduction

What you need

Step 1

              Ribbon Cable               
  • Power off and unplug the echo
  • Using the plastic opening tool, peel off the rubber layer on the bottom of the echo

Power off and unplug the echo

Using the plastic opening tool, peel off the rubber layer on the bottom of the echo

1024

Step 2

  • Use a T8 screwdriver bit to unscrew the 1.6mm four screws.
  • Remove the black cylindrical base

Use a T8 screwdriver bit to unscrew the 1.6mm four screws.

Remove the black cylindrical base

Step 3

  • Use the metal spudger to lift the ZIF connector
  • Remove the ribbon cable from the slot

Use the metal spudger to lift the ZIF connector

Remove the ribbon cable from the slot

Step 4

  • Remove the motherboard

Remove the motherboard

Step 5

  • Remove the silver divider
  • Remove the black rubber divider
  • Remove the plastic white frame

Remove the silver divider

Remove the black rubber divider

Remove the plastic white frame

Step 6

  • Use the metal spudger to lift the ZIF connector
  • Remove the ribbon cable from the slot on the LED/speaker board

Remove the ribbon cable from the slot on the LED/speaker board

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Errica Snelling                     

Member since: 10/09/2017

548 Reputation

                                      1 Guide authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       USF Tampa, Team S1-G3, Leahy Fall 2017                        

                                                  Member of USF Tampa, Team S1-G3, Leahy Fall 2017 



                    USFT-LEAHY-F17S1G3                     


                                            3 Members                     


                                            11 Guides authored                     

jonathan kabitzke - Jul 13, 2019

Reply

Where do you get the replacement cable from?

Armando Morreale - Jul 25, 2022

Reply

Yes, where can one get replacement ribbon cables?

Malcolm oakley - Aug 31, 2022

Reply

Barrie Gash - Dec 2, 2022

Reply

I need a replacement as well now was using a pointed tweezers when putting it back together and stabbed the cable need to find part and order from the uk