Difficulty

Moderate

Steps

6

Time Required

                          5 - 10 minutes

Sections

2

  • Casing
  • 4 steps
  • Speaker
  • 2 steps

Flags

0

  • History
  • Save to Favorites
  • Download PDF
  • Edit
  • Translate
  • Get Shareable Link
  • Embed This Guide
  • Notify Me of Changes
  • Stop Notifications

Introduction

The cone shape of your Echo Dot allows your speaker to transmit Alexa’s voice in an echo that should ideally carry through the room your device is in.

Check the speaker for other potential causes of sound disruption. Potential causes may include the mesh surrounding your Echo Dot being clouded with debris. Your Echo Dot could also be too close to another device such as a microwave that will cause interference.

Before attempting, make sure the Echo Dot is turned off and unplugged from the external power source.

What you need

Step 1

              Casing
  • Turn your Echo Dot over so that the barcode is facing upward.

Turn your Echo Dot over so that the barcode is facing upward.

1024

Step 2

  • Use a spudger to lift the adhesive connecting the device and the cover.

Use a spudger to lift the adhesive connecting the device and the cover.

Step 3

  • Remove the four silver 7.2 mm screws using a T6 Torx screwdriver.

Remove the four silver 7.2 mm screws using a T6 Torx screwdriver.

Step 4

  • Lift the casing of the Echo Dot to separate it from the rest of the device.

Lift the casing of the Echo Dot to separate it from the rest of the device.

Step 5

              Speaker
  • Remove the four black 8.4 mm screws surrounding the speaker using a JIS #1 screwdriver.

Remove the four black 8.4 mm screws surrounding the speaker using a JIS #1 screwdriver.

Step 6

  • Use a spudger to pry the speaker out of the device.

Use a spudger to pry the speaker out of the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Elaina Moore

Member since: 09/15/2022

85 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       University of Memphis, Team 3-2, Lane Fall 2022                        

                                                  Member of University of Memphis, Team 3-2, Lane Fall 2022 



                    UM-LANE-F22S3G2                     


                                            4 Members                     


                                            2 Guides authored