Difficulty
Moderate
Steps
7
Time Required
30 minutes
Sections
2
- Sound foam
- 2 steps
- Button
- 5 steps
Flags
1
Missed a Step
Oops! This guide is currently missing some important steps.
- History
- Save to Favorites
- Download PDF
- Edit
- Translate
- Get Shareable Link
- Embed This Guide
- Notify Me of Changes
- Stop Notifications
Introduction
What you need
Step 1
Sound foam
- Make sure the device is unplugged and powered off.
- Turn the two screw plugs counterclockwise with a metal spudger until they are 90 degrees from their original position.
- Pull each of the plugs out.
Make sure the device is unplugged and powered off.
Turn the two screw plugs counterclockwise with a metal spudger until they are 90 degrees from their original position.
Pull each of the plugs out.
1024
Step 2
- Use the metal spudger to pry and create space between the sound foam and the frame.
- Once you have sufficiently pried the foam from the frame on each side, detach the sound foam from the frame with your hands.
Use the metal spudger to pry and create space between the sound foam and the frame.
Once you have sufficiently pried the foam from the frame on each side, detach the sound foam from the frame with your hands.
Step 3
Button
- Firmly grasp the white trim of the front piece with one hand while the other pulls back on the black back portion of the device.
Firmly grasp the white trim of the front piece with one hand while the other pulls back on the black back portion of the device.
Step 4
- Remove all of the red 2 mm screws using a T5 torx screwdriver.
- Carefully lift away the metal plate.
Remove all of the red 2 mm screws using a T5 torx screwdriver.
Carefully lift away the metal plate.
Step 5
- Using a T5 torx screwdriver, remove all 2 mm screws from the motherboard.
- Remove all orange marked screws from the second metal plate.
Using a T5 torx screwdriver, remove all 2 mm screws from the motherboard.
Remove all orange marked screws from the second metal plate.
Step 6
- Remove the motherboard from the device. Be sure to be careful when removing the black adhesive.
Remove the motherboard from the device. Be sure to be careful when removing the black adhesive.
Step 7
- Remove all 2 mm screws that are attached to the black plastic button casing.
- Remove the case that holds the buttons. Buttons should now be free to remove.
Remove all 2 mm screws that are attached to the black plastic button casing.
Remove the case that holds the buttons. Buttons should now be free to remove.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 5 other contributors
Kara Funke
Member since: 01/24/2020
127 Reputation
1 Guide authored
Badges:
3
Team
Group 02 ERAU - Echo Show
Member of Group 02 ERAU - Echo Show
Meetup
2 Members
1 Guide authored
