Difficulty
Easy
Steps
2
Time Required
2 minutes
Sections
1
- Sound foam
- 2 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
- History
- Save to Favorites
- Download PDF
- Edit
- Translate
- Get Shareable Link
- Embed This Guide
- Notify Me of Changes
- Stop Notifications
Introduction
What you need
Step 1
Sound foam
- Make sure the device is unplugged and powered off.
- Turn the two screw plugs counterclockwise with a metal spudger until they are 90 degrees from their original position.
- Pull each of the plugs out.
Make sure the device is unplugged and powered off.
Turn the two screw plugs counterclockwise with a metal spudger until they are 90 degrees from their original position.
Pull each of the plugs out.
1024
Step 2
- Use the metal spudger to pry and create space between the sound foam and the frame.
- Once you have sufficiently pried the foam from the frame on each side, detach the sound foam from the frame with your hands.
Use the metal spudger to pry and create space between the sound foam and the frame.
Once you have sufficiently pried the foam from the frame on each side, detach the sound foam from the frame with your hands.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 3 other contributors
Schyler Sapinski
Member since: 01/13/2020
329 Reputation
2 Guides authored
Badges:
9
+6 more badges
Team
Embry-Riddle Aeronautical University, Team S3-G2, Watkins Spring 2020
Member of Embry-Riddle Aeronautical University, Team S3-G2, Watkins Spring 2020
ERAU-WATKINS-S20S3G2
4 Members
5 Guides authored
