Difficulty

Easy

Steps

2

Time Required

                          10 minutes

Sections

1

  • Screen
  • 2 steps

Flags

0

  • History
  • Save to Favorites
  • Download PDF
  • Edit
  • Translate
  • Get Shareable Link
  • Embed This Guide
  • Notify Me of Changes
  • Stop Notifications

Introduction

What you need

Step 1

              Screen
  • Use the plastic opening tool to gently lift the plastic protector from screen.

Use the plastic opening tool to gently lift the plastic protector from screen.

1024

Step 2

  • Once the protector is lifted from screen, use the plastic opening tool to remove the actual screen from device, using an opening near the bottom left corner.
  • Once both parts are removed from the device, you can insert the new screen itself. Make sure that the digitizer cable of the new screen is placed within the recess when replacing the screen.
  • If necessary, use adhesive to more firmly secure the LCD or the protector screen to the rest of the device.

Once the protector is lifted from screen, use the plastic opening tool to remove the actual screen from device, using an opening near the bottom left corner.

Once both parts are removed from the device, you can insert the new screen itself. Make sure that the digitizer cable of the new screen is placed within the recess when replacing the screen.

If necessary, use adhesive to more firmly secure the LCD or the protector screen to the rest of the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Christina Simone

Member since: 10/24/2018

561 Reputation

                                      4 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       University of South Florida St. Petersburg, Team S1-G3, Stowe Fall 2018                        

                                                  Member of University of South Florida St. Petersburg, Team S1-G3, Stowe Fall 2018 



                    USFSP-STOWE-F18S1G3                     


                                            4 Members                     


                                            6 Guides authored

gravytray - Aug 29, 2019

Reply

Where do you dug replacement glass for

the echo show 5

djpinna - Nov 13, 2019

Reply

 

Unfortunate since now I have a $230 awesome piece of tech that has a shattered screen. Customer service gave me $30 :/

n3tqv - Nov 20, 2019

Reply

You REALLY should remind folks that the front screen is a digitizer and has a delicate ribbon cable coming off it about 1 1/2 inches from the left lower corner. If you use a pry tool there, you’ll slice the ribbon and ruin the digitizer. Don’t ask me how I know! I now have an Echo show with no touch screen capability. Lower left corner about an inch and a half toward the center. No glue there but if you slide a spudger along there, you’ll cut it for sure. Word to the wise……

Ryan Anderson - Feb 8, 2020

Reply

Yes…. &&^&^$^ ribbon! Where do you get a digitizer. And a power and speaker supply

Jonathan Yankovich - Nov 5, 2021

Reply

Any info on the brand / model number for the digitizer assembly, and any info on how to drive it? I would like to replace the “brains” of my Echo Show 10 2nd Gen with something like a Raspberry Pi. (Not too concerned about Touch, Sound, Mic, though if it was possible to make those work, all the better. Really just need video.). TIA!