Amazon Fire Hd 10 Battery Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          15 - 30 minutes            

Sections

2

• Screen
• 4 steps
• Battery
• 4 steps

Flags

0

• History
• Save to Favorites
• Download PDF
• Edit
• Translate
• Get Shareable Link
• Embed This Guide
• Notify Me of Changes
• Stop Notifications

Introduction

What you need

Step 1

              Screen               

• Avoid prying near bottom right hand side due to LCD Connector
• Use a plastic opening tool to pry the screen up in the right hand corner.

Avoid prying near bottom right hand side due to LCD Connector

Use a plastic opening tool to pry the screen up in the right hand corner.

1024

Step 2

• Do not completely remove the screen yet as there is a ZIF connector connected.
• Lift the screen and digitizer from the case.
• You may need to use some force due to the glue.

Do not completely remove the screen yet as there is a ZIF connector connected.

Lift the screen and digitizer from the case.

You may need to use some force due to the glue.

Step 3

• Be mindful of the ZIF connector.
• Disconnect the ribbon connector from the digitizer side using your hands or the plastic opening tool.

Be mindful of the ZIF connector.

Disconnect the ribbon connector from the digitizer side using your hands or the plastic opening tool.

Step 4

• Remove the screen and digitizer from the case completely.

Remove the screen and digitizer from the case completely.

Step 5

              Battery               

• Locate the power cable that links the battery to the motherboard.
• Carefully unplug the battery power cable to disconnect the battery from the motherboard.
• The third image shows what it should look like with the battery power cable is disconnected.

Locate the power cable that links the battery to the motherboard.

Carefully unplug the battery power cable to disconnect the battery from the motherboard.

The third image shows what it should look like with the battery power cable is disconnected.

Step 6

• Begin by locating the double sided pull tape locations.
• Do not lift on the battery when doing the following step. You will bend it. It is very pliable.
• Pull the black soft tabs to release the tape’s adhesion.
• Make sure you pull the tabs slowly and continuously away from the case until the adhesive is completely out.
• Do this to all 4 tabs until the battery is completely free of adhesion to the device’s backing.

Begin by locating the double sided pull tape locations.

Do not lift on the battery when doing the following step. You will bend it. It is very pliable.

Pull the black soft tabs to release the tape’s adhesion.

Make sure you pull the tabs slowly and continuously away from the case until the adhesive is completely out.

Do this to all 4 tabs until the battery is completely free of adhesion to the device’s backing.

Step 7

• Make sure all the adhesive is removed before trying to lift the battery from the case.
• After the battery is totally free of any adhesion, simply lift the battery from the case.

Make sure all the adhesive is removed before trying to lift the battery from the case.

After the battery is totally free of any adhesion, simply lift the battery from the case.

Step 8

• Inspect battery for any leakage.
• Please follow all U.S. regulations and laws when disposing or recycling the battery.

Inspect battery for any leakage.

Please follow all U.S. regulations and laws when disposing or recycling the battery.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      10 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Jaie Hillery                     

Member since: 10/07/2014

1,685 Reputation

                                      10 Guides authored                  



                       Badges:
                       22







                                                        +19 more badges                           

Team

                       USF Tampa, Team 16-6, Blackwell Winter 2016                        

                                                  Member of USF Tampa, Team 16-6, Blackwell Winter 2016 



                    USFT-BLACKWELL-W16S16G6                     


                                            3 Members                     


                                            22 Guides authored                     

Ethan Chow - Apr 23, 2016

Reply

why is there so much empty space next to the battery?

ctgblue - Jan 17, 2019

Big screen, little processor. The screen dictates the space, that’s why the battery has to be secured with adhesive.

tyger.night - Oct 9, 2018

Reply

I’m confused. If it’s a battery replacement issue, why is the battery not listed on the parts list? Is that not necessary once you take the old one out? Where do I get a new battery to replace the one this is teaching me to remove? O.o

I am buying one with the plastic tools (ebay), even if they suck, they should get through this process once.

Tech Reviews - Sep 8, 2020

Reply

How do you know if ita battery or charging port? Mine dont do anything whe. Its