Amazon Fire Hd 10 Rear Facing Camera Replacement Repair Guide

Difficulty

Easy

Steps

7

Time Required

                          5 minutes            

Sections

2

• Screen
• 4 steps
• Rear Facing Camera
• 3 steps

Flags

0

• History
• Save to Favorites
• Download PDF
• Edit
• Translate
• Get Shareable Link
• Embed This Guide
• Notify Me of Changes
• Stop Notifications

Introduction

What you need

Step 1

              Screen               

• Avoid prying near bottom right hand side due to LCD Connector
• Use a plastic opening tool to pry the screen up in the right hand corner.

Avoid prying near bottom right hand side due to LCD Connector

Use a plastic opening tool to pry the screen up in the right hand corner.

1024

Step 2

• Do not completely remove the screen yet as there is a ZIF connector connected.
• Lift the screen and digitizer from the case.
• You may need to use some force due to the glue.

Do not completely remove the screen yet as there is a ZIF connector connected.

Lift the screen and digitizer from the case.

You may need to use some force due to the glue.

Step 3

• Be mindful of the ZIF connector.
• Disconnect the ribbon connector from the digitizer side using your hands or the plastic opening tool.

Be mindful of the ZIF connector.

Disconnect the ribbon connector from the digitizer side using your hands or the plastic opening tool.

Step 4

• Remove the screen and digitizer from the case completely.

Remove the screen and digitizer from the case completely.

Step 5

              Rear Facing Camera               

• Remove the single T5 Torx screw at the base of the camera.
• Once removed, place the screw aside in a safe location.

Remove the single T5 Torx screw at the base of the camera.

Once removed, place the screw aside in a safe location.

Step 6

• Lift the camera from the case using the plastic opening tool.
• The camera is still connected to the motherboard via the ZIF connector.

Lift the camera from the case using the plastic opening tool.

The camera is still connected to the motherboard via the ZIF connector.

Step 7

• Gently grab the camera and pull to remove.
• The camera is now free from the motherboard.

Gently grab the camera and pull to remove.

The camera is now free from the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Jaie Hillery                     

Member since: 10/07/2014

1,685 Reputation

                                      10 Guides authored                  



                       Badges:
                       22







                                                        +19 more badges                           

Team

                       USF Tampa, Team 16-6, Blackwell Winter 2016                        

                                                  Member of USF Tampa, Team 16-6, Blackwell Winter 2016 



                    USFT-BLACKWELL-W16S16G6                     


                                            3 Members                     


                                            22 Guides authored