Difficulty

Difficult

Steps

6

Time Required

                          5 - 10 minutes

Sections

2

  • Screen
  • 4 steps
  • Rear-facing Camera
  • 2 steps

Flags

0

  • History
  • Save to Favorites
  • Download PDF
  • Edit
  • Translate
  • Get Shareable Link
  • Embed This Guide
  • Notify Me of Changes
  • Stop Notifications

Introduction

What you need

Step 1

              Screen
  • Heat the edges of the screen with a heat gun on the lowest setting by using sweeping motions from about 8-10 inches away.
  • Make sure you use sweeping motions with the heat gun, instead of hovering over one area.

Heat the edges of the screen with a heat gun on the lowest setting by using sweeping motions from about 8-10 inches away.

Make sure you use sweeping motions with the heat gun, instead of hovering over one area.

1024

Step 2

  • After 1-2 minutes, use a plastic opening tool to pry the screen loose. Start at the top right corner and gently pry the screen from the device.
  • Be careful not to bend the screen by pushing it too far from the rest of the device.

After 1-2 minutes, use a plastic opening tool to pry the screen loose. Start at the top right corner and gently pry the screen from the device.

Be careful not to bend the screen by pushing it too far from the rest of the device.

Step 3

  • Slide a plastic opening tool and spudger along the underside of the screen using enough force to peel the screen and the adhesive strip from the other half of the device.
  • Be mindful of the orange cable connecting the screen to the mid-bottom of the device.

Slide a plastic opening tool and spudger along the underside of the screen using enough force to peel the screen and the adhesive strip from the other half of the device.

Be mindful of the orange cable connecting the screen to the mid-bottom of the device.

Step 4

  • To remove the screen from the device, use tweezers to gently pull the orange cable from its connection to the screen.

To remove the screen from the device, use tweezers to gently pull the orange cable from its connection to the screen.

Step 5

              Rear-facing Camera
  • Pop the camera out of the rear-facing camera casing by carefully pulling the orange cable with the tweezers.

Pop the camera out of the rear-facing camera casing by carefully pulling the orange cable with the tweezers.

Step 6

  • Flip up the tab on the ZIF connector at the end of the ribbon cable.
  • Grasp the underside of the orange cable with the tweezers and gently slide the camera out of the connector.

Flip up the tab on the ZIF connector at the end of the ribbon cable.

Grasp the underside of the orange cable with the tweezers and gently slide the camera out of the connector.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors 


                    Alyssa Barrack

Member since: 02/24/2016

819 Reputation

                                      1 Guide authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       USF Tampa, Team 1-3, Leahy Spring 2016                        

                                                  Member of USF Tampa, Team 1-3, Leahy Spring 2016 



                    USFT-LEAHY-S16S1G3                     


                                            4 Members                     


                                            17 Guides authored