Difficulty
Moderate
Steps
4
Time Required
25 minutes
Sections
1
- Speaker
- 4 steps
Flags
0
- History
- Save to Favorites
- Download PDF
- Edit
- Translate
- Get Shareable Link
- Embed This Guide
- Notify Me of Changes
- Stop Notifications
Introduction
What you need
Step 1
Speaker
- Using a metal spudger, push down between the edge seals on the base and pry off the base.
- Do not confuse the top thin layer of rubber with the thick palette that needs to be removed.
- This may require substantial force.
Using a metal spudger, push down between the edge seals on the base and pry off the base.
Do not confuse the top thin layer of rubber with the thick palette that needs to be removed.
This may require substantial force.
1024
Step 2
- Use the T-10 bit from the iFixit tool kit to unscrew the four 1.4 inch corner screws on top of the first layer.
- There are 4 washers to go with each of the screws.
Use the T-10 bit from the iFixit tool kit to unscrew the four 1.4 inch corner screws on top of the first layer.
There are 4 washers to go with each of the screws.
Step 3
- Lift and remove the full frame.
Lift and remove the full frame.
Step 4
- Lift and remove the speaker.
- Carefully match the outlets on the speaker with the outlets on the motherboard.
Lift and remove the speaker.
Carefully match the outlets on the speaker with the outlets on the motherboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 4 other contributors
Justice Davis
Member since: 09/27/2018
219 Reputation
1 Guide authored
Badges:
7
+4 more badges
Team
Linn Benton Community College, Team S1-G1, Johnson Fall 2018
Member of Linn Benton Community College, Team S1-G1, Johnson Fall 2018
LBCC-JOHNSON-F18S1G1
4 Members
5 Guides authored
