Difficulty

Easy

Steps

5

Time Required

                          20 minutes

Sections

1

  • Battery
  • 5 steps

Flags

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

  • History
  • Save to Favorites
  • Download PDF
  • Edit
  • Translate
  • Get Shareable Link
  • Embed This Guide
  • Notify Me of Changes
  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Hold the speaker firmly and wedge a plastic opening tool in between the faceplate and the body of the speaker.
  • Move the tool back and forth along the entire perimeter of the face plate until you feel the plate loosen, then pry the plate off.

Hold the speaker firmly and wedge a plastic opening tool in between the faceplate and the body of the speaker.

Move the tool back and forth along the entire perimeter of the face plate until you feel the plate loosen, then pry the plate off.

1024

Step 2

  • Using a Phillips #1 screwdriver, remove the four black 10mm screws around each of speakers.
  • Using a Phillps #1 screwdriver, remove the four black 10mm screws securing the inside panel to the case.

Using a Phillips #1 screwdriver, remove the four black 10mm screws around each of speakers.

Using a Phillps #1 screwdriver, remove the four black 10mm screws securing the inside panel to the case.

Step 3

  • Tilt the case downwards until the speakers fall out of their housings.
  • Reach your thumb and forefinger past the speakers and detach the front speaker panel from the unit.

Tilt the case downwards until the speakers fall out of their housings.

Reach your thumb and forefinger past the speakers and detach the front speaker panel from the unit.

Step 4

  • Gently pull each plastic connector from the motherboard.
  • Take a note of which connector goes with each component for easy reassembly.
  • Use a Phillips #1 screwdriver to remove each of the three black 9.6mm screws from the motherboard.

Gently pull each plastic connector from the motherboard.

Take a note of which connector goes with each component for easy reassembly.

Use a Phillips #1 screwdriver to remove each of the three black 9.6mm screws from the motherboard.

Step 5

  • Lift the motherboard off the face plate, exposing the battery.
  • Lift the battery out of its housing.
  • Use caution when using tools around the battery; batteries can be dangerous if punctured.

Lift the motherboard off the face plate, exposing the battery.

Lift the battery out of its housing.

Use caution when using tools around the battery; batteries can be dangerous if punctured.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      9 other people completed this guide.

Author

                                      with 1 other contributor 


                    Chris Shannon

Member since: 02/01/2016

1,012 Reputation

                                      5 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       USF Tampa, Team 14-2, Lacy Spring 2016                        

                                                  Member of USF Tampa, Team 14-2, Lacy Spring 2016 



                    USFT-LACY-S16S14G2                     


                                            3 Members                     


                                            5 Guides authored

bnet_d72 - Jan 21, 2017

Reply

donde consigo la bateria?

David Printz - Apr 25, 2017

Reply

Nice job, Chris! Thank you.

Carlos - Jul 10, 2017

Reply

Hello, anybody know where to get the battery from?

Thank you in advance!

dan - Mar 18, 2018

Reply

Need information on where to get a replacement battery!

Makayla Kersting - Mar 26, 2018

Reply

Whar kind of battery is it? I need to know so that I can order a new one.