Ambient Weather Ws 1001 Wifi Lcd Screen Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 - 15 minutes

Sections

LCD Screen
4 steps

Flags

BackAmbient Weather Observer
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

Good Luck!

What you need

Step 1

              LCD Screen

First, you will need to remove all four M2x1-7 screws (7mm length) located on the back of the device. This should be done using a Phillips #1 screw driver.

First, you will need to remove all four M2x1-7 screws (7mm length) located on the back of the device. This should be done using a Phillips #1 screw driver.

1024

Step 2

From the side of the device use the plastic opening tool to pry the gray front casing from the rear black casing.
The ribbon cable is attached inside so the two pieces will not come completely apart. See step 3.

From the side of the device use the plastic opening tool to pry the gray front casing from the rear black casing.

The ribbon cable is attached inside so the two pieces will not come completely apart. See step 3.

Step 3

Using a plastic opening tool, carefully press the black bar towards the ribbon and away from the white bar in order to release it.
The ribbon cable should come out and be attached to the back of the LCD screen resulting in two separate pieces.

Using a plastic opening tool, carefully press the black bar towards the ribbon and away from the white bar in order to release it.

The ribbon cable should come out and be attached to the back of the LCD screen resulting in two separate pieces.

Step 4

Next, you need to remove the LCD screen from the front casing.
Push on the front of the LCD screen to pop it out as seen in picture 2.

Next, you need to remove the LCD screen from the front casing.

Push on the front of the LCD screen to pop it out as seen in picture 2.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors

                    Jeremiah Miskimen

Member since: 11/06/2017

107 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       IUPUI, Team S1-G2, Harley Fall 2017                        

                                                  Member of IUPUI, Team S1-G2, Harley Fall 2017 



                    IUPUI-HARLEY-F17S1G2                     


                                            4 Members                     


                                            3 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team