American Sanders Ezsand Orbital Sander 07163A 2017 Sandpaper Disc Replacement Repair Guide

Difficulty

Very easy

Steps

Time Required

                          10 seconds - 1 minute

Sections

Sandpaper Disc
2 steps

Flags

BackAmerican Sanders EZ-Sand Orbital Sander 07163A (2017)
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

This guide shows the removal of just one disc, but the procedure for the other two discs is identical.

Step 1

              Remove the sandpaper disc

Before you begin, be sure that the sander is unplugged and powered off.
Carefully tilt the sander back and lay it down on its side, exposing the three sanding pads on the bottom.

Before you begin, be sure that the sander is unplugged and powered off.

Carefully tilt the sander back and lay it down on its side, exposing the three sanding pads on the bottom.

1024

Step 2

Peel the hook-and-loop sandpaper disc off of the driver assembly.

Peel the hook-and-loop sandpaper disc off of the driver assembly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor

                    Adam O'Camb

Member since: 04/11/2015

173,479 Reputation

                                      418 Guides authored                  



                       Badges:
                       39







                                                        +36 more badges

Introduction#

#

#

#

#

Introduction