Android Tablet Nobis Nb09 Camera Replacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          10 - 15 minutes            

Sections

2

• Back Cover
• 2 steps
• Camera
• 3 steps

Flags

0

• BackNobis NB09

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Cover               

• Remove the two 00 Phillips screws located in the right hand side of the tablet.

Remove the two 00 Phillips screws located in the right hand side of the tablet.

1024

Step 2

• Use plastic opening tools to loosen and pry off the back plate (pink piece).
• When removing the cover, be careful not to pull too hard as there are wires connected to the motherboard attached to the back cover.

Use plastic opening tools to loosen and pry off the back plate (pink piece).

When removing the cover, be careful not to pull too hard as there are wires connected to the motherboard attached to the back cover.

Step 3

              Camera               

• It is recommended that a grounding bracelet be used in order to avoid damage to the device’s circuits through ESD (Electro-Static Discharge)
• Start by removing the electrical tape covering the camera, located at the top left corner of the device.
• Remove enough tape to expose the ZIF connector and the camera.

It is recommended that a grounding bracelet be used in order to avoid damage to the device’s circuits through ESD (Electro-Static Discharge)

Start by removing the electrical tape covering the camera, located at the top left corner of the device.

Remove enough tape to expose the ZIF connector and the camera.

Step 4

• Lift up the black plastic lock on the ZIF connector with tweezers.
• ZIF stands for Zero Insertion Force connector. Make sure the connector is unlocked completely.

Lift up the black plastic lock on the ZIF connector with tweezers.

ZIF stands for Zero Insertion Force connector. Make sure the connector is unlocked completely.

Step 5

• Gently remove the camera by removing the power cord with tweezers. The camera should release easily: do not twist or pull too hard.
• Replace the camera with a new one.

Gently remove the camera by removing the power cord with tweezers. The camera should release easily: do not twist or pull too hard.

Replace the camera with a new one.

To reassemble your device, follow these instructions in reverse order. Do not forget to put electrical tape back in place.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 5 other contributors 

                    Sergey Kasyanov                     

Member since: 03/26/2015

237 Reputation

                                      2 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       UMass Dartmouth, Team 7-1, Cichon Spring 2015                        

                                                  Member of UMass Dartmouth, Team 7-1, Cichon Spring 2015 



                    UMASSD-CICHON-S15S7G1                     


                                            4 Members                     


                                            12 Guides authored