Android Tablet Nobis Nb09 Screen Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 - 10 minutes

Sections

Screen
4 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

Better Introduction

Improve this guide by completing or revising its introduction.

BackNobis NB09
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

What you need

Step 1

              Screen

Remove the two 00 Phillips screws located on the right side of the tablet.
Use the plastic opening tools to loosen and then pry the back if the tablet off.
When prying off the back of the tablet, be careful around the tablets ports. Too much pressure can cause cracks.

Remove the two 00 Phillips screws located on the right side of the tablet.

Use the plastic opening tools to loosen and then pry the back if the tablet off.

When prying off the back of the tablet, be careful around the tablets ports. Too much pressure can cause cracks.

1024

Step 2

It is recommended that a grounding bracelet be used in order to avoid damage to the device’s circuits through ESD (Electro-Static Discharge)
Remove the electrical tape covering the motherboard.
Remove the four 4.0 mm T4 Torx screws holding the motherboard to the front half of the tablet.
Remove any remaining adhesive tape on the exposed area.

It is recommended that a grounding bracelet be used in order to avoid damage to the device’s circuits through ESD (Electro-Static Discharge)

Remove the electrical tape covering the motherboard.

Remove the four 4.0 mm T4 Torx screws holding the motherboard to the front half of the tablet.

Remove any remaining adhesive tape on the exposed area.

Step 3

Find the notch on the digitzer, located on the left side of the device.
Use the Phillips Screwdriver to gently push the notch and lift the digitizer from the screen.

Find the notch on the digitzer, located on the left side of the device.

Use the Phillips Screwdriver to gently push the notch and lift the digitizer from the screen.

Step 4

Gently slide the digitizer from its clasps to remove it from the screen.
The digitizer should now be removed separately from the screen.

Gently slide the digitizer from its clasps to remove it from the screen.

The digitizer should now be removed separately from the screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 3 other contributors

                    Enea Osmann

Member since: 10/31/2014

158 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       UMass Dartmouth, Team 7-1, Cichon Spring 2015                        

                                                  Member of UMass Dartmouth, Team 7-1, Cichon Spring 2015 



                    UMASSD-CICHON-S15S7G1                     


                                            4 Members                     


                                            12 Guides authored

steven warren - May 27, 2016

The digitizer replacement instructions was great. Thanks

April sharp - Dec 7, 2019

My screen is busted that has the sensor in it do I have to buy a screen or can I use a keyboard?

Action Shots#

Incorrect Tools#

Markup Mishap#

Better Introduction#

What you need#

#

#

#

#

#

#

Team#

#