Anker 2 4G Wireless Mouse Led Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          30 minutes            

Sections

1

• LED
• 7 steps

Flags

0

• BackAnker 2.4G Wireless Mouse

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              LED               

• Use a spudger to gently pry off the stickers to reveal the location of the four screws.

Use a spudger to gently pry off the stickers to reveal the location of the four screws.

1024

Step 2

• Remove the four screws to continue.

Remove the four screws to continue.

Step 3

• Pry the center of the mouse apart using a spudger to separate the upper and lower housing of the boards.

Pry the center of the mouse apart using a spudger to separate the upper and lower housing of the boards.

Step 4

• Remove the wires from the white crimp headers. This will separate the upper and lower housing units of the mouse.
• Pull as far up on the wire as possible, but be careful to avoid ripping the wires.

Remove the wires from the white crimp headers. This will separate the upper and lower housing units of the mouse.

Pull as far up on the wire as possible, but be careful to avoid ripping the wires.

Step 5

• Take the upper housing of the mouse and remove the two screws that hold the board in place.

Take the upper housing of the mouse and remove the two screws that hold the board in place.

Step 6

• Gently remove the circuit board from the mouse.

Gently remove the circuit board from the mouse.

Step 7

• To remove the LED, flip the board over and desolder the wires.
• Replace LED with a new LED and resolder into place.

To remove the LED, flip the board over and desolder the wires.

Replace LED with a new LED and resolder into place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    Colin                     

Member since: 02/10/2014

406 Reputation

                                      3 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Cal Poly, Team 1-39, Maness Winter 2014                        

                                                  Member of Cal Poly, Team 1-39, Maness Winter 2014 



                    CPSU-MANESS-W14S1G39                     


                                            4 Members                     


                                            16 Guides authored