Difficulty

Moderate

Steps

3

Time Required

                          25 - 30 minutes

Sections

2

  • Front Panel
  • 1 step
  • Microphone
  • 2 steps

Flags

0

  • BackAnker SoundCore 2

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Front Panel
  • Insert a spudger between the front panel and the body of the speaker.
  • Pry around the edges of the front panel with the spudger to pry it away from the speaker body.

Insert a spudger between the front panel and the body of the speaker.

Pry around the edges of the front panel with the spudger to pry it away from the speaker body.

1024

Step 2

              Microphone
  • Remove eight 10 mm screws from the speaker mount using a Phillips #0 screwdriver.
  • Insert a spudger in the gap between the speaker mount and speaker body to remove the speaker mount.
  • Flip up the speaker mount panel from the speaker housing case.

Remove eight 10 mm screws from the speaker mount using a Phillips #0 screwdriver.

Insert a spudger in the gap between the speaker mount and speaker body to remove the speaker mount.

Flip up the speaker mount panel from the speaker housing case.

Step 3

  • Disconnect the microphone wire from the motherboard.
  • Use a spudger to pry the microphone out of the speaker mount panel.
  • The microphone is held in place with glue, so you may need to re-glue the new microphone onto the speaker mount panel.

Disconnect the microphone wire from the motherboard.

Use a spudger to pry the microphone out of the speaker mount panel.

The microphone is held in place with glue, so you may need to re-glue the new microphone onto the speaker mount panel.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Tripp Lersch

Member since: 01/14/2021

402 Reputation

                                      4 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Illinois Wesleyan University, Team S1-G2, Bullock Spring 2021                        

                                                  Member of Illinois Wesleyan University, Team S1-G2, Bullock Spring 2021 



                    IWU-BULLOCK-S21S1G2                     


                                            3 Members                     


                                            5 Guides authored