Anker Soundcore Charging Port Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          20 minutes            

Sections

1

• Charging Port
• 7 steps

Flags

0

• BackANKER SoundCore

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

Before attempting to replace anything, it is recommended that you look at this device’s troubleshooting guide.

You will need an iFixit opening tool, Phillips #0 screwdriver, metal spludger, and iFixit opening pick. Soldering experience is needed.

What you need

Step 1

              Charging Port               

• Use the plastic opening tool to pry off the screen.
• Remove the screen from the device.

Use the plastic opening tool to pry off the screen.

Remove the screen from the device.

1024

Step 2

• Remove the eight 10 mm Phillips #0 screws from the speaker mount.

Remove the eight 10 mm Phillips #0 screws from the speaker mount.

Step 3

• Use the metal spludger to pry off speaker mount.

Use the metal spludger to pry off speaker mount.

Step 4

• Remove the two 8mm Phillips #0 screws from the circuit board.

Remove the two 8mm Phillips #0 screws from the circuit board.

Step 5

• Carefully remove the circuit board from the speaker body.

Carefully remove the circuit board from the speaker body.

Step 6

• Use the iFixit Opening Pick to pry off the charging port cover.
• Remove the charging port cover.

Use the iFixit Opening Pick to pry off the charging port cover.

Remove the charging port cover.

Step 7

• Desolder the charging port from the circuit board.
• Solder a new charging port in place of the old one.
• For help soldering and desoldering, follow this guide.

Desolder the charging port from the circuit board.

Solder a new charging port in place of the old one.

For help soldering and desoldering, follow this guide.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Briana Kuo                     

Member since: 02/10/2020

311 Reputation

                                      1 Guide authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       Cal Poly, Team S22-G1, Regan Winter 2020                        

                                                  Member of Cal Poly, Team S22-G1, Regan Winter 2020 



                    CPSU-REGAN-W20S22G1                     


                                            5 Members                     


                                            5 Guides authored                     

tommy2197 - Sep 4, 2020

Reply

Where can I find a replacement port that is compatible?

Mike - Sep 30, 2020

Reply

Agi - Nov 28, 2021

The Charging port is an USB Mirco Port. To find right part search for JBL FLIP 3 on ebay or other platforms. It is the same part as used for the Anker SoundCore.

Justin - Apr 13, 2022

Reply

Hi I have a Anker soundcore motion plus, the charging port is loose and not charging, it’s a usb c, where can I buy that replacement part

.thanks