Anker Soundcore Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          8 - 10 minutes

Sections

Speaker
6 steps

Flags

BackANKER SoundCore
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

Before attempting to replace anything, it is recommended that you look at this device’s troubleshooting guide.

Faulty speakers are often the cause of poor sound quality, but are not always the problem. Check the troubleshooting guide before, for any other possible solutions to poor sound quality.

What you need

Step 1

              Speaker

Use a iFixit plastic opening tool to pry off the screen.
Remove the screen from the device.

Use a iFixit plastic opening tool to pry off the screen.

Remove the screen from the device.

1024

Step 2

Remove the 10mm Philips #0 screws from speaker mount.

Remove the 10mm Philips #0 screws from speaker mount.

Step 3

Use a spudger tool to remove speaker mount.
Ensure all wires are still properly attached in device.

Use a spudger tool to remove speaker mount.

Ensure all wires are still properly attached in device.

Step 4

Remove the 8mm Philips #0 screws holding speakers in place.

Remove the 8mm Philips #0 screws holding speakers in place.

Step 5

Pull out the speakers.

Pull out the speakers.

Step 6

Desolder the speaker wires.
Remove both of the speakers from the circuit board.
For help soldering and desoldering, follow this guide.

Desolder the speaker wires.

Remove both of the speakers from the circuit board.

For help soldering and desoldering, follow this guide.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 3 other contributors

                    Cory Troxell

Member since: 02/07/2020

187 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Cal Poly, Team S22-G1, Regan Winter 2020                        

                                                  Member of Cal Poly, Team S22-G1, Regan Winter 2020 



                    CPSU-REGAN-W20S22G1                     


                                            5 Members                     


                                            5 Guides authored

tom mason - Nov 29, 2020

What speaker do you replace them with?

Octavio Rodrigues - Apr 28, 2022

I would like to buy some parts of recording of this items how do I get from y’all is there any phone number Contac anything UK

Introduction#

What you need#

Team#

Introduction

What you need

Team