Difficulty

Easy

Steps

8

Time Required

                          5 - 15 minutes

Sections

1

  • Case/Housing
  • 8 steps

Flags

0

  • BackKeyboard

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Case/Housing
  • Unplug the Anne Pro 2 Keyboard.
  • Turn off the Anne Pro 2 Keyboard using the switch on the bottom.

Unplug the Anne Pro 2 Keyboard.

Turn off the Anne Pro 2 Keyboard using the switch on the bottom.

1024

Step 2

  • Using a keycap remover, remove the the following keycaps: Left Alt, Space Bar, Right Shift, Backslash, Y, H, and the Tab key.

Using a keycap remover, remove the the following keycaps: Left Alt, Space Bar, Right Shift, Backslash, Y, H, and the Tab key.

Step 3

  • Using a Torx T5 bit, remove the five screws from the keyboard.

Using a Torx T5 bit, remove the five screws from the keyboard.

Step 4

  • Lift the keyboard slowly from the bottom side.
  • Do not fully lift the PCB because the battery is still plugged in.

Lift the keyboard slowly from the bottom side.

Do not fully lift the PCB because the battery is still plugged in.

Step 5

  • Gently unplug the battery connector by wiggling it back and forth.

Gently unplug the battery connector by wiggling it back and forth.

Step 6

  • Remove the PCB from the main case.
  • Gently lower the PCB into the Zero-Degree housing from the top side first.
  • Firmly press it in once you have lowered it.

Remove the PCB from the main case.

Gently lower the PCB into the Zero-Degree housing from the top side first.

Firmly press it in once you have lowered it.

Step 7

  • Screw the five T5 Torx screws back into place.

Screw the five T5 Torx screws back into place.

Step 8

  • Take the seven keycaps you removed and gently place them in their intended spots on the keyboard.
  • Firmly press them in, ensuring they are flush with the rest of the keys.

Take the seven keycaps you removed and gently place them in their intended spots on the keyboard.

Firmly press them in, ensuring they are flush with the rest of the keys.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 1 other contributor 


                    Mohamed

Member since: 09/15/2020

205 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       York University, Team S2-G3, Melo-Thaiss Fall 2020                        

                                                  Member of York University, Team S2-G3, Melo-Thaiss Fall 2020 



                    YORK-MELO-THAISS-F20S2G3                     


                                            1 Member                     


                                            2 Guides authored

Abhinav Pal - Feb 22, 2022

Reply

Anne Pro 2 Software manage the illumination, open the mobile App and choose a pre-programmed scheme or design your own pattern, with a distinct colour for each key if desired. The programmes are easy to use and work on both Mac and PC.

Visit Here-   https://www.techtoreview.com/top-picks/a…