Difficulty

Easy

Steps

5

Time Required

                          40 minutes - 1 hour

Sections

1

  • Keycaps
  • 5 steps

Flags

0

  • BackKeyboard

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

The Anne Pro 2 keyboard is a high end gaming keyboard that is used widely across the world. The keyboard is unique in that it is a 60% keyboard, meaning it only has 60% of the normal amount of keys of a traditional keyboard. This creates an easier path to fixing the keyboard due to a reduction in keys. This guide will show you how to replace all keycaps of the Anne Pro 2 and also clean the keyboard of all dust and hair.

Before beginning, make sure to power off your keyboard completely and disconnect from any external power source.

What you need

Step 1

              Keycaps
  • Set the keyboard down on a flat surface. Make sure it is turned off and is not connected to a power source.

Set the keyboard down on a flat surface. Make sure it is turned off and is not connected to a power source.

1024

Step 2

  • Use the keycap remover to remove the key caps from left to right.
  • Remove the smaller keycaps first so the surrounding larger caps can be removed more easily.

Use the keycap remover to remove the key caps from left to right.

Remove the smaller keycaps first so the surrounding larger caps can be removed more easily.

Step 3

  • Use the compressed air to remove all dust and hair from the keyboard.
  • Focus on the red key switches to make sure all dust and hair are removed from inside.

Use the compressed air to remove all dust and hair from the keyboard.

Focus on the red key switches to make sure all dust and hair are removed from inside.

Step 4

  • New replacement keycaps can be used here, but if you see no damage to older keycaps they can be re-used.
  • Use the keycap remover to set in the keycaps starting from the bottom to the top.

New replacement keycaps can be used here, but if you see no damage to older keycaps they can be re-used.

Use the keycap remover to set in the keycaps starting from the bottom to the top.

Step 5

  • Inspect the final product, making sure all keycaps are back in the right place and functioning.

Inspect the final product, making sure all keycaps are back in the right place and functioning.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Omar Sukkar

Member since: 11/24/2020

145 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       University of Memphis, Team S4-G5, Kim Fall 2020                        

                                                  Member of University of Memphis, Team S4-G5, Kim Fall 2020 



                    UM-KIM-F20S4G5                     


                                            1 Member                     


                                            2 Guides authored