Difficulty

Difficult

Steps

4

Time Required

                          15 minutes

Sections

2

  • Back Casing
  • 1 step
  • Front Camera
  • 3 steps

Flags

0

  • BackAPEX TM785CH

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Casing
  • Start by bending the tablet back at the top white-colored portion to expose an opening between the back cover and the tablet body.
  • Wedge a plastic opening tool into the opening and push it down to force the back cover off.
  • Move along the top edge of the tablet and repeat the step above.
  • Pull the back cover away from the tablet body to completely remove it.

Start by bending the tablet back at the top white-colored portion to expose an opening between the back cover and the tablet body.

Wedge a plastic opening tool into the opening and push it down to force the back cover off.

Move along the top edge of the tablet and repeat the step above.

Pull the back cover away from the tablet body to completely remove it.

1024

Step 2

              Front Camera
  • To get to the front camera, you will first need to remove the top panel.
  • Unscrew two 2.25 mm Phillips screws with a #00 screwdriver from the top plastic panel to remove it.

To get to the front camera, you will first need to remove the top panel.

Unscrew two 2.25 mm Phillips screws with a #00 screwdriver from the top plastic panel to remove it.

Step 3

  • Once unscrewed, use a spudger to pop the panel off by wedging it underneath the panel.

Once unscrewed, use a spudger to pop the panel off by wedging it underneath the panel.

Step 4

  • First, use plastic coated tweezers to pull up the black release tab.
  • Pull on the black connector with tweezers as close as possible to the white connector base, making sure not to pull on the connector base.
  • It is important to be careful not to damage the black connector tape or the white base.
  • Next, use the tweezers to peel off the tape holding down the connector to the front camera.
  • The front camera can now be removed from its socket.

First, use plastic coated tweezers to pull up the black release tab.

Pull on the black connector with tweezers as close as possible to the white connector base, making sure not to pull on the connector base.

It is important to be careful not to damage the black connector tape or the white base.

Next, use the tweezers to peel off the tape holding down the connector to the front camera.

The front camera can now be removed from its socket.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Brian Graschel

Member since: 03/23/2015

823 Reputation

                                      6 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       Baylor, Team 4-1, Williams Spring 2015                        

                                                  Member of Baylor, Team 4-1, Williams Spring 2015 



                    BU-WILLIAMS-S15S4G1                     


                                            3 Members                     


                                            12 Guides authored