Difficulty

Difficult

Steps

3

Time Required

                          15 minutes

Sections

2

  • Back Casing
  • 1 step
  • Microphone
  • 2 steps

Flags

0

  • BackAPEX TM785CH

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

You will need an opening tool for removing the cover and a soldering kit for removing the wires.

What you need

Step 1

              Back Casing
  • Start by bending the tablet back at the top white-colored portion to expose an opening between the back cover and the tablet body.
  • Wedge a plastic opening tool into the opening and push it down to force the back cover off.
  • Move along the top edge of the tablet and repeat the step above.
  • Pull the back cover away from the tablet body to completely remove it.

Start by bending the tablet back at the top white-colored portion to expose an opening between the back cover and the tablet body.

Wedge a plastic opening tool into the opening and push it down to force the back cover off.

Move along the top edge of the tablet and repeat the step above.

Pull the back cover away from the tablet body to completely remove it.

1024

Step 2

              Microphone
  • The microphone is located in the bottom center of the tablet.
  • Remove the black tape holding the wires down.
  • Remove the black tape holding the microphone in place.
  • The microphone is now exposed and can be gently pulled out of the socket.

The microphone is located in the bottom center of the tablet.

Remove the black tape holding the wires down.

Remove the black tape holding the microphone in place.

The microphone is now exposed and can be gently pulled out of the socket.

Step 3

  • You will need a soldering/desoldering kit to desolder the 2 leads where the microphone connects to the circuit board.

You will need a soldering/desoldering kit to desolder the 2 leads where the microphone connects to the circuit board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Brian Graschel

Member since: 03/23/2015

823 Reputation

                                      6 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       Baylor, Team 4-1, Williams Spring 2015                        

                                                  Member of Baylor, Team 4-1, Williams Spring 2015 



                    BU-WILLIAMS-S15S4G1                     


                                            3 Members                     


                                            12 Guides authored