Difficulty

Easy

Steps

10

Time Required

                          15 minutes

Sections

3

  • Disassembling Apple IIc Cover
  • 4 steps
  • Keyboard
  • 1 step
  • Floppy Drive
  • 5 steps

Flags

0

  • BackApple IIc

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Disassembling Apple IIc Cover
  • Remove the six 19 mm long screws with a #2 Phillips head screwdriver.

Remove the six 19 mm long screws with a #2 Phillips head screwdriver.

1024

Step 2

  • Release the catch by pushing it in using a plastic opening tool.
  • The catch is off-center, but in line with the middle of the speaker underneath.

Release the catch by pushing it in using a plastic opening tool.

The catch is off-center, but in line with the middle of the speaker underneath.

Step 3

  • Slide the case toward the ports on the back, then grip under the catch and pull up while moving toward the ports to remove.

Slide the case toward the ports on the back, then grip under the catch and pull up while moving toward the ports to remove.

Step 4

  • Lift the handle straight up to remove.

Lift the handle straight up to remove.

Step 5

              Keyboard
  • Tilt the keyboard up while detaching the ribbon connection by pulling it straight up. You may have to wiggle the connector sideways to loosen it.
  • Be careful not to force the ribbon while pulling it out to avoid tearing. Do not try to pull the ribbon out by pulling the keyboard as it may cause tearing.

Tilt the keyboard up while detaching the ribbon connection by pulling it straight up. You may have to wiggle the connector sideways to loosen it.

Be careful not to force the ribbon while pulling it out to avoid tearing. Do not try to pull the ribbon out by pulling the keyboard as it may cause tearing.

Step 6

              Floppy Drive
  • Carefully place device upside down to remove the four centered 21.1 mm screws that secure the floppy drive.

Carefully place device upside down to remove the four centered 21.1 mm screws that secure the floppy drive.

Step 7

  • Carefully detach ribbon connector from floppy disk drive by pulling it out horizontally.

Carefully detach ribbon connector from floppy disk drive by pulling it out horizontally.

Step 8

  • Unscrew the four 8.5 mm screws that attach the floppy drive cage. Two screws are located on the front and back of the cage.

Unscrew the four 8.5 mm screws that attach the floppy drive cage. Two screws are located on the front and back of the cage.

Step 9

  • Carefully lift the floppy drive cage straight up to remove it.

Carefully lift the floppy drive cage straight up to remove it.

Step 10

  • Lift the floppy drive straight up to remove.

Lift the floppy drive straight up to remove.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      8 other people completed this guide.

Author

                                      with 5 other contributors 


                    Alexandria Weinberg

Member since: 10/06/2011

601 Reputation

                                      3 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Cal Poly, Team 21-23, Maness Fall 2011                        

                                                  Member of Cal Poly, Team 21-23, Maness Fall 2011 



                    CPSU-MANESS-F11S21G23                     


                                            4 Members                     


                                            13 Guides authored