Difficulty
Moderate
Steps
4
Time Required
5 minutes
Sections
1
- Lisa DAC
- 4 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackApple Lisa 2/10
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Remove Lisa's Rear Panel
- Follow the Apple Lisa Disassembly Guide to remove the Lisa’s real panel.
Follow the Apple Lisa Disassembly Guide to remove the Lisa’s real panel.
1024
Step 2
Installing the Lisa DAC
- Locate Lisa’s expansion slots.
- Locate expansion slot 2.
- Pull the metal rod out from slot 2 and rotate 90º clockwise.
- Slide the Lisa DAC into expansion slot 2.
- Rotate the metal rod, as described before, 90º counter-clockwise and push in to secure the Lisa DAC.
Locate Lisa’s expansion slots.
Locate expansion slot 2.
Pull the metal rod out from slot 2 and rotate 90º clockwise.
Slide the Lisa DAC into expansion slot 2.
Rotate the metal rod, as described before, 90º counter-clockwise and push in to secure the Lisa DAC.
Step 3
Reinstall Rear Panel
- Reinstall the Lisa’s rear panel.
Reinstall the Lisa’s rear panel.
Step 4
Installing Lisa DAC Software
- The Lisa DAC software can be found here.
- Lisa DAC requires MacWorks Plus II.
The Lisa DAC software can be found here.
Lisa DAC requires MacWorks Plus II.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
LisaGuide
Member since: 12/30/2018
1,803 Reputation
11 Guides authored
Badges:
9
+6 more badges