Apple Lisa Scsi Card Installation Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          5 minutes            

Sections

1

• SCSI Card
• 5 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackApple Lisa 2/10

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Disassembly               

• Follow the Apple Lisa Disassembly Guide to remove the Lisa’s real panel.
• Remove the Lisa’s Card Cage.

Follow the Apple Lisa Disassembly Guide to remove the Lisa’s real panel.

Remove the Lisa’s Card Cage.

1024

Step 2

              Installing the SCSI Card               

• Locate Lisa’s expansion slots.
• Locate expansion slot 3.
• Pull the metal rod out from slot 3 and rotate 90º clockwise.
• Slide the SCSI Card into expansion slot 3.
• Rotate the metal rod, as described before, 90º counter-clockwise and push in to secure the Lisa DAC.

Locate Lisa’s expansion slots.

Locate expansion slot 3.

Pull the metal rod out from slot 3 and rotate 90º clockwise.

Slide the SCSI Card into expansion slot 3.

Rotate the metal rod, as described before, 90º counter-clockwise and push in to secure the Lisa DAC.

Step 3

              SCSI Upgrades               

• The SCSI card includes 1 internal connector and 1 external connector.
• The internal connector is used for connecting a hard disk.
• If you intend to connect a hard disk then connect it now.
• Pin 1 is marked.
• The SCSI Card can also be cut to accommodate a Card Cage fan upon order request.

The SCSI card includes 1 internal connector and 1 external connector.

The internal connector is used for connecting a hard disk.

If you intend to connect a hard disk then connect it now.

Pin 1 is marked.

The SCSI Card can also be cut to accommodate a Card Cage fan upon order request.

Step 4

              Reinstall Rear Panel               

• Reinstall the Lisa’s rear panel.

Reinstall the Lisa’s rear panel.

Step 5

              Using the SCSI Card               

• The SCSI Card requires MacWorks Plus II.
• To use devices connected to the SCSI card please refer to the device’s manual for proper device installation.
• This SCSI card was installed to use an Apple External SCSI CD-ROM Drive.

The SCSI Card requires MacWorks Plus II.

To use devices connected to the SCSI card please refer to the device’s manual for proper device installation.

This SCSI card was installed to use an Apple External SCSI CD-ROM Drive.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    LisaGuide                     

Member since: 12/30/2018

1,803 Reputation

                                      11 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges