Difficulty
Easy
Steps
3
Time Required
5 minutes
Sections
1
- Keyboard
- 3 steps
Flags
0
BackApple PowerBook G3 400
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Step 1
Keyboard
- Pull the keyboard tabs toward you while lifting up on the keyboard until it releases from it’s hold.
- To lift the keyboard out pull it up and away from you. Then place the keyboard on the track pad.
Pull the keyboard tabs toward you while lifting up on the keyboard until it releases from it’s hold.
To lift the keyboard out pull it up and away from you. Then place the keyboard on the track pad.
1024
Step 2
- Pull the keyboard ribbon vertically from the logic board to release connection.
- The connector may be tight and difficult to remove. If stuck try rocking the connector back and forth while pulling up until it releases. This same process can be used for many of the connectors on this device.
- Remove battery and CD/DVD drives before proceeding any further.
Pull the keyboard ribbon vertically from the logic board to release connection.
The connector may be tight and difficult to remove. If stuck try rocking the connector back and forth while pulling up until it releases. This same process can be used for many of the connectors on this device.
Remove battery and CD/DVD drives before proceeding any further.
Step 3
- Your computer should look approximately like this.
Your computer should look approximately like this.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Byron Hoefer
Member since: 04/18/2011
70 Reputation
2 Guides authored
Badges:
8
+5 more badges
Team
Cal Poly, Team 4-2, Regan Spring 2011
Member of Cal Poly, Team 4-2, Regan Spring 2011
CPSU-REGAN-S11S4G2
4 Members
6 Guides authored