Apple Studio Display M7649 Metal Emi Shield Replacement Repair Guide

Difficulty

Very easy

Steps

Time Required

                          4 - 5 minutes

Sections

Stand
1 step
Panels
3 steps
Metal EMI Shield
3 steps

Flags

BackApple Studio Display M7649
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Stand

Lay the display facing down with the stand away from you.
Remove the three size 2.0 hex screws on the swing arm and remove the swing arm as well as the plastic shield under it.

Lay the display facing down with the stand away from you.

Remove the three size 2.0 hex screws on the swing arm and remove the swing arm as well as the plastic shield under it.

1024

Step 2

              Panels

Remove the size 2.5 hex screws from each corner that connects the panels to the display and remove them.

Remove the size 2.5 hex screws from each corner that connects the panels to the display and remove them.

Step 3

Rotate the display so the legs of the display are now facing you
Grip the top of the clear panel and lift it upwards, and pull the ADC cable through the hole.

Rotate the display so the legs of the display are now facing you

Grip the top of the clear panel and lift it upwards, and pull the ADC cable through the hole.

Step 4

Remove the grey back panel by lifting the bottom and pulling the ADC cable through the hole.

Remove the grey back panel by lifting the bottom and pulling the ADC cable through the hole.

Step 5

              Metal EMI Shield

The next layer will be a shiny metal panel, which might have some stickers. Make sure to remove these stickers.

The next layer will be a shiny metal panel, which might have some stickers. Make sure to remove these stickers.

Step 6

Now locate and remove the lone Phillips screw holding the EMI shield to the display

Now locate and remove the lone Phillips screw holding the EMI shield to the display

Step 7

Now that the screw has been removed, slide the panel towards your body and lift it out.
You may need to remove the clear USB port cover to remove the metal EMI shield.

Now that the screw has been removed, slide the panel towards your body and lift it out.

You may need to remove the clear USB port cover to remove the metal EMI shield.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Alan Truong

Member since: 01/19/2010

503 Reputation

                                      3 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       Cal Poly, Team 3-20, Maness Winter 2010                        

                                                  Member of Cal Poly, Team 3-20, Maness Winter 2010 



                    CPSU-MANESS-W10S3G20                     


                                            4 Members                     


                                            15 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team