Difficulty

Moderate

Steps

4

Time Required

                          40 minutes            

Sections

1

  • Opening for Repair
  • 4 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackApple Time Capsule

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Step 1

              cutting the rubber               
  • all measures are with the rubber still on. and it stays on.
  • first you take a cutter and cut little squared or circles or what you prefer into the rubber. and then, f.e with the screwdriver tear of the rubber on the incicion you just did.
  • there are exact measures in millimetres. I recommend to turn the TimeCapsule with connections facing you and then start from the lower left corner.
  • fyi: 1 inch = 25,4 mm, 1 feet = 304,8 mm
  • Note: the green lines indicate that the screws are in alignment with each other.
  • Note: the different color circles indicate screws. I found only the 1. gen TimeCapsule sometimes be having the purple screws. with the 2.,3.,4. Generation I never found the purple ones.

all measures are with the rubber still on. and it stays on.

first you take a cutter and cut little squared or circles or what you prefer into the rubber. and then, f.e with the screwdriver tear of the rubber on the incicion you just did.

there are exact measures in millimetres. I recommend to turn the TimeCapsule with connections facing you and then start from the lower left corner.

fyi: 1 inch = 25,4 mm, 1 feet = 304,8 mm

Note: the green lines indicate that the screws are in alignment with each other.

Note: the different color circles indicate screws. I found only the 1. gen TimeCapsule sometimes be having the purple screws. with the 2.,3.,4. Generation I never found the purple ones.

1024

Step 2

              different generations               
  • the first generation is sometimes different. I had ones where in the purple markers are screws . sometimes they are reveted from the other side, and must not be removed.
  • the 2,3,4 generation have almost the same screws. sometimes the brown ones dont exist.

the first generation is sometimes different. I had ones where in the purple markers are screws . sometimes they are reveted from the other side, and must not be removed.

the 2,3,4 generation have almost the same screws. sometimes the brown ones dont exist.

Step 3

              opening the box               
  • turn the TimeCapsile 90D clockwise.
  • then get something where you can lean on the opened but still connected part. (in my case I used another time capsule for it)
  • then carefully open the lid to the left. and carefully put it aside like shown on the picture
  • after that you can do inside whatever you desire. in my case I took out the hard drive

turn the TimeCapsile 90D clockwise.

then get something where you can lean on the opened but still connected part. (in my case I used another time capsule for it)

then carefully open the lid to the left. and carefully put it aside like shown on the picture

after that you can do inside whatever you desire. in my case I took out the hard drive

Step 4

  • if you are nerdy or have too much time on your hand, you can keep the cut-out rubber pieces and after replacement you can glue the right parts back in.
  • note: nobody sees the bottom of the TimeCapsule in general.
  • so I did not.
  • ENJOY

if you are nerdy or have too much time on your hand, you can keep the cut-out rubber pieces and after replacement you can glue the right parts back in.

note: nobody sees the bottom of the TimeCapsule in general.

so I did not.

ENJOY

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    Martin David                     

Member since: 05/27/2013

244 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges