Difficulty
Moderate
Steps
4
Time Required
10 - 15 minutes
Sections
2
- Snap-on Base
- 2 steps
- Logic Board
- 2 steps
Flags
1
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackApple TV 3rd Generation
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Snap-on Base
- As the device base is firmly clipped, insert two metal spudgers to gently release the first clips.
As the device base is firmly clipped, insert two metal spudgers to gently release the first clips.
1024
Step 2
- Continue releasing the last plastic clips with your hands taking care not to break any of the plastic elements attached to the base.
Continue releasing the last plastic clips with your hands taking care not to break any of the plastic elements attached to the base.
Step 3
Logic Board
- Use a philips screwdriver to remove the 5 screws securing the metal heat sink.
Use a philips screwdriver to remove the 5 screws securing the metal heat sink.
Step 4
- Disconnect the power supply connector from the logic board with a spudger.
Disconnect the power supply connector from the logic board with a spudger.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
9 other people completed this guide.
Author
with 3 other contributors
Vincent Monteil
Member since: 07/06/2013
6,843 Reputation
19 Guides authored
Badges:
30
+27 more badges
Ricky Vaughn - Jun 27, 2015
Reply
Where can I find a 3rd Generation Apple TV Logic Board?
Nathan Bugeja - Oct 17, 2015
Good question! Did you manage to find a replacement?
Mohamed Iqbal Sayyed - Sep 23, 2017
Reply
Hi my wifi and athernet is not working in apple tv on screen it showing your apple tv is connected to local network its not connect to internet now how should i repair this
Juan Ignacio Gutierrez I. - Sep 4, 2018
Mine too, where could I find a logic board replacement???