Difficulty

Moderate

Steps

5

Time Required

                          7 - 10 minutes            

Sections

1

  • Logic Board
  • 5 steps

Flags

This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.

  • BackApple TV 4K

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Logic Board               
  • Use a spudger to pry the bottom panel off from the body. It is held on with clips on the inside, so you will need to make sure those are undone while opening.
  • The panel is held onto the device tightly, so you may need to be a bit forceful to remove it.

Use a spudger to pry the bottom panel off from the body. It is held on with clips on the inside, so you will need to make sure those are undone while opening.

The panel is held onto the device tightly, so you may need to be a bit forceful to remove it.

1024

Step 2

  • Remove the following screws using a T6 Torx screwdriver holding the heat sink assembly in.
  • Four 10 mm screws
  • Lift and remove the heat sink assembly from the device.

Remove the following screws using a T6 Torx screwdriver holding the heat sink assembly in.

Four 10 mm screws

Lift and remove the heat sink assembly from the device.

Step 3

  • Use plastic spudger to pull up on all three antenna connectors to remove them.
  • Remove rubber piece from front side of device.

Use plastic spudger to pull up on all three antenna connectors to remove them.

Remove rubber piece from front side of device.

Step 4

  • Unscrew the following screws holding the logic board in place using the T7 Torx:
  • Two black 3 mm screws
  • Two silver 4 mm screws

Unscrew the following screws holding the logic board in place using the T7 Torx:

Two black 3 mm screws

Two silver 4 mm screws

Step 5

  • Use a spudger to pry up logic board. Try lifting it up from the front side.
  • Remove logic board and set aside.

Use a spudger to pry up logic board. Try lifting it up from the front side.

Remove logic board and set aside.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      8 other people completed this guide.                                             

Author

                                      with 5 other contributors 

                    Keenan Barber                     

Member since: 10/04/2018

1,090 Reputation

                                      3 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       UW Stout, Team S6-G3, Ogden Fall 2018                        

                                                  Member of UW Stout, Team S6-G3, Ogden Fall 2018 



                    UWSTOUT-OGDEN-F18S6G3                     


                                            4 Members                     


                                            8 Guides authored                     

MP94025 - Dec 28, 2018

Reply

Where does one get a new logic board??

tylerchumchal - Jan 20, 2020

Reply

Any idea on where I can purchase. new logic board?

Andy Grichtmeier - Feb 3, 2020

Reply

Where do you buy the board…….

Kanehoe - Aug 5, 2020

Reply

, where can you buy another one or is an exercise in futility

oTWR - Nov 28, 2020

Reply

Hm. Has anyone’s Apple TV 4k logic board failed?