Apple Tv 4K Remote Logic Board Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          10 - 15 minutes            

Sections

1

• Remote Logic Board
• 8 steps

Flags

0

• BackApple TV 4K

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Remote Logic Board               

• Heat iOpener according to manufacturer’s instructions.
• Place over the face of the remote to soften the adhesive under the glass.

Heat iOpener according to manufacturer’s instructions.

Place over the face of the remote to soften the adhesive under the glass.

1024

Step 2

• Using a spudger, gently lift the face of the remote. Starting from the bottom and working your way to the top.

Using a spudger, gently lift the face of the remote. Starting from the bottom and working your way to the top.

Step 3

• Push front face forward to disengage plastic clips at the top of the remote.

Push front face forward to disengage plastic clips at the top of the remote.

Step 4

• Unlatch the connector that binds the touch screen and logic board.
• Afterwards, use tweezers to detach the connector that binds the touch screen to the logic board.

Unlatch the connector that binds the touch screen and logic board.

Afterwards, use tweezers to detach the connector that binds the touch screen to the logic board.

Step 5

• Lift the face from the body of the remote.

Lift the face from the body of the remote.

Step 6

• Lift the latch holding back the connector to the battery.
• Use tweezers to disconnect the battery connector.

Lift the latch holding back the connector to the battery.

Use tweezers to disconnect the battery connector.

Step 7

• Remove the following screws using a T3 Torx screwdriver:
• Eight 2mm screws

Remove the following screws using a T3 Torx screwdriver:

Eight 2mm screws

Step 8

• Using a plastic spudger, gently remove the logic board from the case of the remote.

Using a plastic spudger, gently remove the logic board from the case of the remote.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Keenan Barber                     

Member since: 10/04/2018

1,090 Reputation

                                      3 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       UW Stout, Team S6-G3, Ogden Fall 2018                        

                                                  Member of UW Stout, Team S6-G3, Ogden Fall 2018 



                    UWSTOUT-OGDEN-F18S6G3                     


                                            4 Members                     


                                            8 Guides authored                     

B R - Sep 23, 2019

Reply

Have you ever successfully reconnected the ribbon cable after disassembly? It seems nearly impossible to do by hand…