Difficulty
Very easy
Steps
3
Time Required
5 minutes
Sections
1
- Back Cover
- 3 steps
Flags
0
BackAquaris M5
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Insert the tip of an iFixit opening tool between the back cover and the mid frame of the phone.
- Between the 2 SIM card slots is a good place to start.
- Slide the opening tool to the bottom of the phone, to snap out the plastic clips, connecting the back cover and mid frame.
Insert the tip of an iFixit opening tool between the back cover and the mid frame of the phone.
Between the 2 SIM card slots is a good place to start.
Slide the opening tool to the bottom of the phone, to snap out the plastic clips, connecting the back cover and mid frame.
1024
Step 2
- Slide the opening tool back to the top of the phone, to disconnect all the clips on the edge.
- Slide around the corner and along the top edge, to also disconnect these clips.
Slide the opening tool back to the top of the phone, to disconnect all the clips on the edge.
Slide around the corner and along the top edge, to also disconnect these clips.
Step 3
- Be careful not to bend the back cover too hard to prevent some of the clips breaking.
- Grab the back cover by the loosened edge.
- Gently bend and twist the flexible back cover a bit to disconnect the remaining clips.
- Take off the back cover.
Be careful not to bend the back cover too hard to prevent some of the clips breaking.
Grab the back cover by the loosened edge.
Gently bend and twist the flexible back cover a bit to disconnect the remaining clips.
Take off the back cover.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Theo Mat
Member since: 11/12/2017
12,412 Reputation
14 Guides authored
Badges:
24
+21 more badges