Difficulty

Moderate

Steps

4

Time Required

Suggest a time??

Sections

1

  • Battery
  • 4 steps

Flags

0

  • BackArchos 97 Carbon

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Pry open the tablet by having the tablet face upward. To pry open, start over in the left corner (by the buttons) working clockwise until the tablet is open.

Pry open the tablet by having the tablet face upward. To pry open, start over in the left corner (by the buttons) working clockwise until the tablet is open.

1024

Step 2

  • Once the screen is separated from the back panel, you will see two cables connecting the screen to the interior of the tablet (one silver, one black)
  • Remove the black tape that is holding the end of the black cable to the white tab.
  • Gently pull the cable away from the tab with tweezers disconnecting the plug from the outlet.

Once the screen is separated from the back panel, you will see two cables connecting the screen to the interior of the tablet (one silver, one black)

Remove the black tape that is holding the end of the black cable to the white tab.

Gently pull the cable away from the tab with tweezers disconnecting the plug from the outlet.

Step 3

  • Remove the silver cable by removing the tape that connects the cable and screen. Gently detach the gold cable from the outlet.

Remove the silver cable by removing the tape that connects the cable and screen. Gently detach the gold cable from the outlet.

Step 4

  • Now the interior of the tablet is fully accessible.
  • Heat the soldering gun until it is fully heated. Place the tip of the soldering gun over the solder that seals the red and black battery cables to the motherboard. Once the solder is heated the cables can be removed.

Now the interior of the tablet is fully accessible.

Heat the soldering gun until it is fully heated. Place the tip of the soldering gun over the solder that seals the red and black battery cables to the motherboard. Once the solder is heated the cables can be removed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 5 other contributors 


                    Kirsti McCarty

Member since: 03/03/2015

110 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Sam Houston State, Team 13-5, Blackburne Winter 2015                        

                                                  Member of Sam Houston State, Team 13-5, Blackburne Winter 2015 



                    SHSU-BLACKBURNE-W15S13G5                     


                                            3 Members                     


                                            8 Guides authored