Archos 97 Carbon Speakers Replacement Repair Guide

Difficulty

Difficult

Steps

6

Time Required

Suggest a time??

Sections

1

• Speakers
• 6 steps

Flags

2

Better Introduction

Improve this guide by completing or revising its introduction.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

• BackArchos 97 Carbon

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Speakers               

• Pry the tablet open in the corner using an opening tool.
• Start in the top left corner and continue clockwise until the two pieces are separated.

Pry the tablet open in the corner using an opening tool.

Start in the top left corner and continue clockwise until the two pieces are separated.

1024

Step 2

• Remove the tape and plug connecting the cable to the tab, and it will come loose.
• This will loosen the cable connecting the screen to the interior of the tablet.

Remove the tape and plug connecting the cable to the tab, and it will come loose.

This will loosen the cable connecting the screen to the interior of the tablet.

Step 3

• Remove the black tape from the silver cable connecting the screen to the motherboard on the left side of the tablet.
• This will loosen the gold plug.

Remove the black tape from the silver cable connecting the screen to the motherboard on the left side of the tablet.

This will loosen the gold plug.

Step 4

• Once you have separated the the screen from the tablet, you can place the screen to the side. You should be looking at this part of the tablet.
• These are the speakers.

Once you have separated the the screen from the tablet, you can place the screen to the side. You should be looking at this part of the tablet.

These are the speakers.

Step 5

• Desolder each of the three wires to detach the speaker wires from the tablet.
• There are three wires that you will desolder from the motherboard. One is red, one is black, and one is white.
• We recommend that you use a solder sucker to suck up any of the residue that the solder produces.

Desolder each of the three wires to detach the speaker wires from the tablet.

There are three wires that you will desolder from the motherboard. One is red, one is black, and one is white.

We recommend that you use a solder sucker to suck up any of the residue that the solder produces.

Step 6

• Pry each of the speakers up with an opening tool.
• Remove the speakers and their connected wires from the tablet.

Pry each of the speakers up with an opening tool.

Remove the speakers and their connected wires from the tablet.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 4 other contributors 

                    Allyson Seber                     

Member since: 03/03/2015

311 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Sam Houston State, Team 13-5, Blackburne Winter 2015                        

                                                  Member of Sam Houston State, Team 13-5, Blackburne Winter 2015 



                    SHSU-BLACKBURNE-W15S13G5                     


                                            3 Members                     


                                            8 Guides authored