Archos Jukebox Recorder 20 Hard Drive Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          5 minutes            

Sections

2

• Battery
• 2 steps
• Hard Drive
• 5 steps

Flags

0

• BackArchos Jukebox Recorder 20

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Remove the plastic cover over the batteries on both sides of the device.

Remove the plastic cover over the batteries on both sides of the device.

1024

Step 2

• Remove the batteries (may require a plastic opening tool or spudger to pop the batteries out).

Remove the batteries (may require a plastic opening tool or spudger to pop the batteries out).

Step 3

              Hard Drive               

• Use the T10 Torx Screwdriver to remove the 2 torx screws on each side of the device.
• Two on each side for a total of four.

Use the T10 Torx Screwdriver to remove the 2 torx screws on each side of the device.

Two on each side for a total of four.

Step 4

• Remove the 2 screws on the top and the 2 screws on the bottom of the device using a Phillips #0 screwdriver.

Remove the 2 screws on the top and the 2 screws on the bottom of the device using a Phillips #0 screwdriver.

Step 5

• Remove the outer metal casing of the device by popping it off with a plastic opening tool.

Remove the outer metal casing of the device by popping it off with a plastic opening tool.

Step 6

• Remove the rubber bumpers on all four corners of the device.

Remove the rubber bumpers on all four corners of the device.

Step 7

• Lift the hard drive out of its casing with the help of a plastic opening tool and slide it out. This will disconnect the pins connecting the drive to the rest of the device.

Lift the hard drive out of its casing with the help of a plastic opening tool and slide it out. This will disconnect the pins connecting the drive to the rest of the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Aidan Patterson                     

Member since: 01/08/2018

315 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       IUPUI, Team S1-G4, Freund Spring 2018                        

                                                  Member of IUPUI, Team S1-G4, Freund Spring 2018 



                    IUPUI-FREUND-S18S1G4                     


                                            3 Members                     


                                            2 Guides authored