Difficulty

Moderate

Steps

10

Time Required

Suggest a time??

Sections

3

  • Battery
  • 2 steps
  • Button Panel
  • 3 steps
  • Motherboard
  • 5 steps

Flags

0

  • BackArchos Jukebox Recorder 20

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Remove the plastic cover over the batteries on both sides of the device.

Remove the plastic cover over the batteries on both sides of the device.

1024

Step 2

  • Remove the batteries (may require a plastic opening tool or spudger to pop the batteries out).

Remove the batteries (may require a plastic opening tool or spudger to pop the batteries out).

Step 3

              Button Panel
  • Using the Philips Screwdriver, remove the top 2 screws.
  • The screws are very small (2.5mm), put them somewhere you won’t lose them.

Using the Philips Screwdriver, remove the top 2 screws.

The screws are very small (2.5mm), put them somewhere you won’t lose them.

Step 4

  • Using the Philips screwdriver, remove the bottom 2 screws (2.5mm).

Using the Philips screwdriver, remove the bottom 2 screws (2.5mm).

Step 5

  • Remove the face.

Remove the face.

Step 6

              Motherboard
  • Remove four surrounding T5 screws as shown

Remove four surrounding T5 screws as shown

Step 7

  • Remove all four purple bumpers. You may have to bend the metal surround out of the way.

Remove all four purple bumpers. You may have to bend the metal surround out of the way.

Step 8

  • Remove metal surround from the Jukebox. You may have to straighten out tabs that were bent during disassembly.

Remove metal surround from the Jukebox. You may have to straighten out tabs that were bent during disassembly.

Step 9

  • Desolder the motherboard from the frame at the eight locations shown. You may need to use a desoldering pump.

Desolder the motherboard from the frame at the eight locations shown. You may need to use a desoldering pump.

Step 10

  • Desolder the remaining two points on the backside of the Jukebox.
  • The Motherboard should now be free from the frame and ready for repair or replacement.

Desolder the remaining two points on the backside of the Jukebox.

The Motherboard should now be free from the frame and ready for repair or replacement.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Shaun Rifield

Member since: 03/21/2018

121 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       IUPUI, Team S2-G3, Freund Spring 2018                        

                                                  Member of IUPUI, Team S2-G3, Freund Spring 2018 



                    IUPUI-FREUND-S18S2G3                     


                                            3 Members                     


                                            2 Guides authored