Difficulty
Moderate
Steps
4
Time Required
5 - 15 minutes
Sections
1
- Lid
- 4 steps
Flags
0
BackAroma ARC-914SBD
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Lid
- Begin by removing the condensation catcher to expose the screw. Pinch the condensation catcher from both sides and pull.
Begin by removing the condensation catcher to expose the screw. Pinch the condensation catcher from both sides and pull.
1024
Step 2
- Remove the screw that was behind the condensation catcher using a Phillips head screwdriver, size PH2.
Remove the screw that was behind the condensation catcher using a Phillips head screwdriver, size PH2.
Step 3
- Remove the piece that was held by the screw by pulling out from the top, then pulling up. This will expose the hinges for the lid.
Remove the piece that was held by the screw by pulling out from the top, then pulling up. This will expose the hinges for the lid.
Step 4
- To remove the hinges, rotate the bottom of the rod upwards, then push inwards to pull them out. Repeat the process for both sides. This will allow the lid to be removed.
To remove the hinges, rotate the bottom of the rod upwards, then push inwards to pull them out. Repeat the process for both sides. This will allow the lid to be removed.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 5 other contributors
Brandon Nieves
Member since: 09/04/2015
956 Reputation
8 Guides authored
Badges:
11
+8 more badges
Team
USF Tampa, Team 2-3, Sullivan Fall 2015
Member of USF Tampa, Team 2-3, Sullivan Fall 2015
USFT-SULLIVAN-F15S2G3
3 Members
8 Guides authored