Difficulty

Easy

Steps

7

Time Required

Suggest a time??

Sections

1

  • Assemble bObi Pet Post-Repair
  • 7 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackbObi Pet Robotic Vacuum and Mop

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Connect the Cover
  • Attach the 2 circuit plugs from bObi Pet’s cover back onto her main board.
  • The yellow-wired plug connects to the right side of the mainboard.
  • The white-wired plug on bObi Pet’s lid connects to the middle of the mainboard.

Attach the 2 circuit plugs from bObi Pet’s cover back onto her main board.

The yellow-wired plug connects to the right side of the mainboard.

The white-wired plug on bObi Pet’s lid connects to the middle of the mainboard.

1024

Step 2

              Align bObi Pet's Cover
  • Lay down bObi Pet’s cover and line up the edges precisely.
  • While holding bObi Pet’s top and bottom together, carefully flip her over onto a flat surface.

Lay down bObi Pet’s cover and line up the edges precisely.

While holding bObi Pet’s top and bottom together, carefully flip her over onto a flat surface.

Step 3

              Replace the Front Wheel
  • Reinstall the front wheel’s screw.
  • Then, place the front wheel on top and firmly push down to secure it.

Reinstall the front wheel’s screw.

Then, place the front wheel on top and firmly push down to secure it.

Step 4

              Secure the Cover
  • Replace the dustbin’s red fastener and install its 2 screws.
  • Install the 4 screws in the space beneath the brush compartment.

Replace the dustbin’s red fastener and install its 2 screws.

Install the 4 screws in the space beneath the brush compartment.

Step 5

              Secure the Brushes on bObi Pet
  • Plug in the brush compartment.
  • Then, replace its red brush fastener and install the 2 screws.

Plug in the brush compartment.

Then, replace its red brush fastener and install the 2 screws.

Step 6

              Replace the Bin Holders
  • Position the brush compartment back in its original place on bObi Pet.
  • Now reinsert the corner pieces on both sides of the dustbin, with the arms of the brush attachment linked.

Position the brush compartment back in its original place on bObi Pet.

Now reinsert the corner pieces on both sides of the dustbin, with the arms of the brush attachment linked.

Step 7

              Replace the Dustbin
  • Ensure the rubber strip near bObi Pet’s dustbin is not stuck underneath the brush compartment. Then, reinstall the 2 screws in each of the corner pieces.
  • Make sure the bin can slide in easily before using bObi Pet again and your repair is complete.

Ensure the rubber strip near bObi Pet’s dustbin is not stuck underneath the brush compartment. Then, reinstall the 2 screws in each of the corner pieces.

Make sure the bin can slide in easily before using bObi Pet again and your repair is complete.

After completing these steps, your bObi Pet should be back together in working order. Just replace any brushes and filters that may have been removed during disassembly.

Congratulations on completing your repair and happy cleaning!

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Chelsea

Member since: 09/24/2014

2,278 Reputation

                                      31 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges