Assembling Parabolic Solar Cooker Expansion Pipe And T Bar Repair Guide

Difficulty

Easy

Steps

3

Time Required

                          5 minutes            

Sections

2

• Assembling Parabolic Solar Cooker Tripod Base Stand
• 2 steps
• Assembling Parabolic Solar Cooker Expansion Pipe and T-Bar
• 1 step

Flags

0

• BackParabolic Solar Cooker

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Assembling Parabolic Solar Cooker Tripod Base Stand               

• Insert a 14mm bolt through each tripod leg and through the center plate. Secure each bolt by hand threading a nut on the other side.
• Be sure the flat side of each tripod leg is facing toward the ground.

Insert a 14mm bolt through each tripod leg and through the center plate. Secure each bolt by hand threading a nut on the other side.

Be sure the flat side of each tripod leg is facing toward the ground.

1024

Step 2

• Tighten each nut using two 14mm wrenches until each leg is stable and the tripod will stand on its own.

Tighten each nut using two 14mm wrenches until each leg is stable and the tripod will stand on its own.

Step 3

              Assembling Parabolic Solar Cooker Expansion Pipe and T-Bar               

• Center the bottom of the expansion pipe between the tabs of the t-bar bracket. Insert a 14mm bolt through the bracket and expansion pipe and hand thread a nut. Use 14mm wrenches to secure the assembly.
• It does not matter which direction the 14mm bolt is inserted from.

Center the bottom of the expansion pipe between the tabs of the t-bar bracket. Insert a 14mm bolt through the bracket and expansion pipe and hand thread a nut. Use 14mm wrenches to secure the assembly.

It does not matter which direction the 14mm bolt is inserted from.

To disassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 4 other contributors 

                    Ashlie Reott                     

Member since: 10/20/2013

328 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       Cal Poly, Team 4-30, Amido Fall 2013                        

                                                  Member of Cal Poly, Team 4-30, Amido Fall 2013 



                    CPSU-AMIDO-F13S4G30                     


                                            4 Members                     


                                            6 Guides authored