Difficulty
Easy
Steps
2
Time Required
5 minutes
Sections
1
- Assembling Parabolic Solar Cooker Tripod Base Stand
- 2 steps
Flags
0
BackParabolic Solar Cooker
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Assembling Parabolic Solar Cooker Tripod Base Stand
- Insert a 14mm bolt through each tripod leg and through the center plate. Secure each bolt by hand threading a nut on the other side.
- Be sure the flat side of each tripod leg is facing toward the ground.
Insert a 14mm bolt through each tripod leg and through the center plate. Secure each bolt by hand threading a nut on the other side.
Be sure the flat side of each tripod leg is facing toward the ground.
1024
Step 2
- Tighten each nut using two 14mm wrenches until each leg is stable and the tripod will stand on its own.
Tighten each nut using two 14mm wrenches until each leg is stable and the tripod will stand on its own.
To disassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 5 other contributors
Ashlie Reott
Member since: 10/20/2013
328 Reputation
3 Guides authored
Badges:
8
+5 more badges
Team
Cal Poly, Team 4-30, Amido Fall 2013
Member of Cal Poly, Team 4-30, Amido Fall 2013
CPSU-AMIDO-F13S4G30
4 Members
6 Guides authored
