Difficulty
Moderate
Steps
5
Time Required
4 minutes
Sections
1
- Lower Case
- 5 steps
Flags
2
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
Slice and Dice
The steps in this guide should be split up and made into a series of prerequisite guides.
BackAstak Mole
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Lower Case
- Remove the four bottom tabs in order to access the bottom screws.
Remove the four bottom tabs in order to access the bottom screws.
1024
Step 2
- Remove all four 14 mm Phillips #1 screws.
Remove all four 14 mm Phillips #1 screws.
Step 3
- Remove the SD card.
Remove the SD card.
Step 4
- Pry up the motherboard on the four points using a spudger.
- The regular black nylon spudger should be used whenever possible, especially around sensitive internal components.
Pry up the motherboard on the four points using a spudger.
The regular black nylon spudger should be used whenever possible, especially around sensitive internal components.
Step 5
- Gently pull back the motherboard to expose many of the component’s wired connections.
Gently pull back the motherboard to expose many of the component’s wired connections.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Joseph Bello
Member since: 09/20/2016
228 Reputation
2 Guides authored
Badges:
7
+4 more badges
Team
USF Tampa, Team 2-2, Blackwell Fall 2016
Member of USF Tampa, Team 2-2, Blackwell Fall 2016
USFT-BLACKWELL-F16S2G2
4 Members
12 Guides authored