Difficulty

Very easy

Steps

4

Time Required

                          2 - 5 minutes

Sections

1

  • Frame
  • 4 steps

Flags

2

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Missed a Step

Oops! This guide is currently missing some important steps.

  • BackAstro A20

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Frame
  • Place your hand on the back of the speaker.

Place your hand on the back of the speaker.

1024

Step 2

  • Remove the four 7mm screws with a Phillips #1 screwdriver.
  • You may want to use a 60mm screwdriver extension to reach the screws inside of the headset.

Remove the four 7mm screws with a Phillips #1 screwdriver.

You may want to use a 60mm screwdriver extension to reach the screws inside of the headset.

Step 3

  • Lift the speaker.
  • Disconnect the white connector from the device.
  • Remove the wires connecting the frame shown by the yellow square.
  • Pull the black cord through the hole shown by the blue arrow.

Lift the speaker.

Disconnect the white connector from the device.

Remove the wires connecting the frame shown by the yellow square.

Pull the black cord through the hole shown by the blue arrow.

Step 4

  • Find the top 7mm J1 JIS head screws.
  • Remove the two 7mm J1 JIS head screws with a J1 screwdriver bit connected to a 60mm extension.
  • Pull the black cord through the frame.

Find the top 7mm J1 JIS head screws.

Remove the two 7mm J1 JIS head screws with a J1 screwdriver bit connected to a 60mm extension.

Pull the black cord through the frame.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Jasmine Yarbrough

Member since: 09/10/2018

873 Reputation

                                      5 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       University of Alabama, Team S1-G2, Bedsole Fall 2018                        

                                                  Member of University of Alabama, Team S1-G2, Bedsole Fall 2018 



                    UA-BEDSOLE-F18S1G2                     


                                            4 Members                     


                                            10 Guides authored