Difficulty

Moderate

Steps

6

Time Required

                          10 - 15 minutes            

Sections

2

  • Cushion
  • 3 steps
  • Microphone
  • 3 steps

Flags

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Missed a Step

Oops! This guide is currently missing some important steps.

  • BackAstro A20

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Cushion               
  • Place one hand on the hard side of the headset ear portion and on the cushion.
  • Lift the small portion on the edge of the cushion.

Place one hand on the hard side of the headset ear portion and on the cushion.

Lift the small portion on the edge of the cushion.

1024

Step 2

  • Slide the metal spudger underneath the lift part of the ear cushion.
  • Pull the ear cushion while wedging the spudge around the edge of the ear cushion.

Slide the metal spudger underneath the lift part of the ear cushion.

Pull the ear cushion while wedging the spudge around the edge of the ear cushion.

Step 3

  • Remove the ear cushion from the headset.

Remove the ear cushion from the headset.

Step 4

              Microphone               
  • Place one hand on the back of the speaker.

Place one hand on the back of the speaker.

Step 5

  • Remove the four 7mm screws with a Phillips #1 screwdriver.
  • You may want to use a 60mm screwdriver extension to reach the screws inside of the headset.

Remove the four 7mm screws with a Phillips #1 screwdriver.

You may want to use a 60mm screwdriver extension to reach the screws inside of the headset.

Step 6

  • Lift the speaker area.
  • Disconnect the wires that connect the microphone.
  • Remove the 7mm screw with a Phillips #1 screwdriver.

Lift the speaker area.

Disconnect the wires that connect the microphone.

Remove the 7mm screw with a Phillips #1 screwdriver.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      7 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Jasmine Yarbrough                     

Member since: 09/10/2018

873 Reputation

                                      5 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       University of Alabama, Team S1-G2, Bedsole Fall 2018                        

                                                  Member of University of Alabama, Team S1-G2, Bedsole Fall 2018 



                    UA-BEDSOLE-F18S1G2                     


                                            4 Members                     


                                            10 Guides authored                     

Thompson Crusher - Dec 28, 2019

Reply

worked for me….thanks

Bruh Bruh - Sep 28, 2020

Reply

listen my mic peace is messed up is there like a fix for that

jrod6t9 - Dec 17, 2022

Reply

were? are you getting the new mic from? please link the site