Difficulty
Moderate
Steps
6
Time Required
10 - 15 minutes
Sections
2
- Cushion
- 3 steps
- Speaker
- 3 steps
Flags
0
BackAstro A20
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Cushion
- Place one hand on the hard side of the headset ear portion and on the cushion.
- Lift the small portion on the edge of the cushion.
Place one hand on the hard side of the headset ear portion and on the cushion.
Lift the small portion on the edge of the cushion.
1024
Step 2
- Slide the metal spudger underneath the lift part of the ear cushion.
- Pull the ear cushion while wedging the spudge around the edge of the ear cushion.
Slide the metal spudger underneath the lift part of the ear cushion.
Pull the ear cushion while wedging the spudge around the edge of the ear cushion.
Step 3
- Remove the ear cushion from the headset.
Remove the ear cushion from the headset.
Step 4
Speaker
- Place your hand on the opposite side of the speaker.
Place your hand on the opposite side of the speaker.
Step 5
- Remove the four 7mm screws with a Phillips #1 screwdriver.
- You may want to use a 60mm screwdriver extension to reach the screws inside of the headset.
Remove the four 7mm screws with a Phillips #1 screwdriver.
You may want to use a 60mm screwdriver extension to reach the screws inside of the headset.
Step 6
- Lift the speaker area.
- Disconnect the wires connected to the speaker.
- Wedge a spudger on the edge of the speaker and lift upwards to remove the speaker from the device.
Lift the speaker area.
Disconnect the wires connected to the speaker.
Wedge a spudger on the edge of the speaker and lift upwards to remove the speaker from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 2 other contributors
Jasmine Yarbrough
Member since: 09/10/2018
873 Reputation
5 Guides authored
Badges:
12
+9 more badges
Team
University of Alabama, Team S1-G2, Bedsole Fall 2018
Member of University of Alabama, Team S1-G2, Bedsole Fall 2018
UA-BEDSOLE-F18S1G2
4 Members
10 Guides authored