Difficulty

Moderate

Steps

9

Time Required

                          5 - 10 minutes

Sections

2

  • Headset Speakers
  • 4 steps
  • Headset Battery
  • 5 steps

Flags

0

  • BackAstro A50 2016

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Headset Speakers
  • Remove the magnetic ear pads by gently pulling up away from the head set.

Remove the magnetic ear pads by gently pulling up away from the head set.

1024

Step 2

  • Squeeze the plastic opening tool between the black plastic and foam pad on non mic side and then pry upwards to remove the felt pads covering the speaker.

Squeeze the plastic opening tool between the black plastic and foam pad on non mic side and then pry upwards to remove the felt pads covering the speaker.

Step 3

  • Remove the four 6mm Phillips 1 screws.

Remove the four 6mm Phillips 1 screws.

Step 4

  • Lift the speaker module up off the device.

Lift the speaker module up off the device.

Step 5

              Headset Battery
  • Remove the five 6mm PH1 screws.
  • Remove the buttons panel by pulling the panel away from the white ribbon cord.

Remove the five 6mm PH1 screws.

Remove the buttons panel by pulling the panel away from the white ribbon cord.

Step 6

  • Remove the four 6mm PH1 screws.
  • Remove the tape holding the wires connected to the motherboard.

Remove the four 6mm PH1 screws.

Remove the tape holding the wires connected to the motherboard.

Step 7

  • Remove the back panel by squeezing the two tabs together and pushing out.

Remove the back panel by squeezing the two tabs together and pushing out.

Step 8

  • Disconnect the battery wires by desoldering them.
  • How To Solder and Desolder Connections

Disconnect the battery wires by desoldering them.

How To Solder and Desolder Connections

Step 9

  • Remove the battery by using the plastic opening tool to pry it away from the headset.

Remove the battery by using the plastic opening tool to pry it away from the headset.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      11 other people completed this guide.

Author

                                      with 3 other contributors 


                    Andrew Monson

Member since: 10/02/2017

422 Reputation

                                      1 Guide authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Cal Poly, Team S15-G1, Livingston Fall 2017                        

                                                  Member of Cal Poly, Team S15-G1, Livingston Fall 2017 



                    CPSU-LIVINGSTON-F17S15G1                     


                                            3 Members                     


                                            10 Guides authored

vic.bianco - May 3, 2018

Reply

Is this for the Gen III Astro a50?

Crisdavid - Oct 31, 2019

Yes it’s for the Gen 3 A50

Brandon Phillips - Dec 29, 2018

Reply

Where do I buy a battery though….

Jan Ejlersen - Jan 23, 2019

Reply

https://www.aliexpress.com/item/Cameron-…

Ahmed f - Aug 27, 2019

Reply

how can I connect the new battery ?