Difficulty

Moderate

Steps

12

Time Required

Suggest a time??

Sections

3

  • Battery
  • 4 steps
  • Front Screen Case
  • 3 steps
  • Screen
  • 5 steps

Flags

0

  • BackAsus 1015E-DS03

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Hold the laptop using both hands with the battery facing upwards.

Hold the laptop using both hands with the battery facing upwards.

1024

Step 2

  • Push the two tabs located below the battery in towards each other using your thumbs.

Push the two tabs located below the battery in towards each other using your thumbs.

Step 3

  • Push the battery upwards and out of the laptop as shown.

Push the battery upwards and out of the laptop as shown.

Step 4

  • Continue to push the battery upwards until it is completely separated from the laptop as shown.

Continue to push the battery upwards until it is completely separated from the laptop as shown.

Step 5

              Front Screen Case
  • Push up on the back of the tabs that cover the hinges connecting the screen to the base of the laptop.
  • While pushing up on the back of the tabs, insert the spudger into the opening created from pushing on the tabs until the tab detaches.

Push up on the back of the tabs that cover the hinges connecting the screen to the base of the laptop.

While pushing up on the back of the tabs, insert the spudger into the opening created from pushing on the tabs until the tab detaches.

Step 6

  • Once the case has been separated from the laptop, pull the case off completely, using the plastic opening tool or your fingers.
  • You will hear popping noises which are to be expected.

Once the case has been separated from the laptop, pull the case off completely, using the plastic opening tool or your fingers.

You will hear popping noises which are to be expected.

Step 7

  • When the screen case has been successfully removed, the laptop should resemble the photo shown here.

When the screen case has been successfully removed, the laptop should resemble the photo shown here.

Step 8

              Screen
  • Unscrew the 3 mm screws (4) using a #0 Phillips head screwdriver.

Unscrew the 3 mm screws (4) using a #0 Phillips head screwdriver.

Step 9

  • Lift the screen away from the computer.
  • Be careful removing the screen, as the left side is still connected to the computer.

Lift the screen away from the computer.

Be careful removing the screen, as the left side is still connected to the computer.

Step 10

  • Remove the wire that is glued to the back of the screen with your fingers.
  • Remove the tape covering the connection port.

Remove the wire that is glued to the back of the screen with your fingers.

Remove the tape covering the connection port.

Step 11

  • Separate the screen from the computer by gently pulling it out.

Separate the screen from the computer by gently pulling it out.

Step 12

  • Upon removal, the computer should look like this picture.

Upon removal, the computer should look like this picture.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 5 other contributors 


                    Becca Day

Member since: 03/23/2016

297 Reputation

                                      2 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Clemson, Team 7-4, Benson Spring 2016                        

                                                  Member of Clemson, Team 7-4, Benson Spring 2016 



                    CLEM-BENSON-S16S7G4                     


                                            5 Members                     


                                            7 Guides authored