Difficulty

Easy

Steps

7

Time Required

                          10 minutes

Sections

1

  • Asus A4110 Disassembly
  • 7 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackAsus A4110

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Step 1

              Open case
  • Remove screws at the circles
  • Remove gum strap and screw 5 screws out
  • Use a big screwdriver or some plastic to softly open the entire case around, starting at one down corner where your removed the screws before. The plastic clips will click a little. Don’t be to hard.
  • Then you can lay the back next to the front, see second picture.

Remove screws at the circles

Remove gum strap and screw 5 screws out

Use a big screwdriver or some plastic to softly open the entire case around, starting at one down corner where your removed the screws before. The plastic clips will click a little. Don’t be to hard.

Then you can lay the back next to the front, see second picture.

1024

Step 2

  • Remove VESA mount by 4 screws
  • Remove mainboard blend by 9 screws afterwards.

Remove VESA mount by 4 screws

Remove mainboard blend by 9 screws afterwards.

Step 3

  • You can now replace harddrive or RAM easily. Remove harddrive to continue mainboard disassembly.
  • Remove WiFi module to continue disassembly. Watch for correct cable connection (they are crossed)

You can now replace harddrive or RAM easily. Remove harddrive to continue mainboard disassembly.

Remove WiFi module to continue disassembly. Watch for correct cable connection (they are crossed)

Step 4

  • Remove display cables by pulling the white plastic clip up from the cable side
  • Pull up the left clip same as the right one from first picture from cable side.
  • Then the touch connector (middle) must be opened from board side up, be patient and watch out for this, else your connector might be broken!

Remove display cables by pulling the white plastic clip up from the cable side

Pull up the left clip same as the right one from first picture from cable side.

Then the touch connector (middle) must be opened from board side up, be patient and watch out for this, else your connector might be broken!

Step 5

  • This is how the connectors should now look like, see the marked position of the plastic strips.

This is how the connectors should now look like, see the marked position of the plastic strips.

Step 6

  • Remove further connectors for USB, power, sound and keys.

Remove further connectors for USB, power, sound and keys.

Step 7

  • Now remove 9 screws and the cooling screw to remove the mainboard.

Now remove 9 screws and the cooling screw to remove the mainboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Max

Member since: 06/03/2021

175 Reputation

                                      1 Guide authored                  



                       Badges:
                       3