Difficulty

Moderate

Steps

9

Time Required

                          15 - 45 minutes

Sections

1

  • Battery
  • 9 steps

Flags

0

  • BackASUS Chromebook Flip C100PA-RBRKT07

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Use the T5 screwdriver to remove the nine 2.1 mm screws from the bottom of the device.

Use the T5 screwdriver to remove the nine 2.1 mm screws from the bottom of the device.

1024

Step 2

  • Use the iFixit opening tool to remove the 4 pads to reveal six 3.1 mm screws underneath.

Use the iFixit opening tool to remove the 4 pads to reveal six 3.1 mm screws underneath.

Step 3

  • Use the T5 screwdriver to remove the 6 3.1 mm screws under the pads.
  • There might be a layer of tape that covers the screws. Remove the tape first with a pair of tweezers.

Use the T5 screwdriver to remove the 6 3.1 mm screws under the pads.

There might be a layer of tape that covers the screws. Remove the tape first with a pair of tweezers.

Step 4

  • Use the iFixit opening tool to pry the backing of the device off.

Use the iFixit opening tool to pry the backing of the device off.

Step 5

  • Use the tweezers to separate the cables from the motherboard.
  • You need to reach inside and peel some tape to disconnect the wire.

Use the tweezers to separate the cables from the motherboard.

You need to reach inside and peel some tape to disconnect the wire.

Step 6

  • Use the JIS1 screwdriver to remove the four 2.1 mm screws around the audio cards.

Use the JIS1 screwdriver to remove the four 2.1 mm screws around the audio cards.

Step 7

  • Gently disconnect the audio cards, exposing the battery.

Gently disconnect the audio cards, exposing the battery.

Step 8

  • Use the J00 screwdriver to remove the three 1.7 mm battery screws.

Use the J00 screwdriver to remove the three 1.7 mm battery screws.

Step 9

  • Grip the battery and remove it from the device.
  • Remove the battery cable out of the motherboard by lifting the battery cables.

Grip the battery and remove it from the device.

Remove the battery cable out of the motherboard by lifting the battery cables.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    Tiffany Foo

Member since: 01/24/2019

289 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Cal Poly, Team S19-G4, White Winter 2019                        

                                                  Member of Cal Poly, Team S19-G4, White Winter 2019 



                    CPSU-WHITE-W19S19G4                     


                                            4 Members                     


                                            12 Guides authored