Difficulty
Moderate
Steps
9
Time Required
15 - 35 minutes
Sections
2
- Lower Case
- 5 steps
- Trackpad
- 4 steps
Flags
1
Featured Student Guide
This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.
BackASUS Chromebook Flip C100PA-RBRKT07
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Lower Case
- Use the T5 screwdriver to remove the nine 2.1 mm screws from the bottom of the device.
Use the T5 screwdriver to remove the nine 2.1 mm screws from the bottom of the device.
1024
Step 2
- Use the iFixit opening tool to remove the 4 pads to reveal six 3.1 mm screws underneath.
Use the iFixit opening tool to remove the 4 pads to reveal six 3.1 mm screws underneath.
Step 3
- Use the T5 screwdriver to remove the six 3.1 mm screws under the pads.
- There might be a layer of tape that covers the screws. Remove the tape first with a pair of tweezers.
Use the T5 screwdriver to remove the six 3.1 mm screws under the pads.
There might be a layer of tape that covers the screws. Remove the tape first with a pair of tweezers.
Step 4
- Use the iFixit opening tool to remove the back of the laptop.
Use the iFixit opening tool to remove the back of the laptop.
Step 5
- Use the blunt nose tweezers to separate the keyboard from the internal components.
Use the blunt nose tweezers to separate the keyboard from the internal components.
Step 6
Trackpad
- Grip the keyboard and carefully pull it off the device.
Grip the keyboard and carefully pull it off the device.
Step 7
- On the back of the keyboard assembly, use the tweezers to pull the white cable from the track pad.
On the back of the keyboard assembly, use the tweezers to pull the white cable from the track pad.
Step 8
- Remove the three 1 mm screws from the track pad using the JIS 00 screwdriver.
Remove the three 1 mm screws from the track pad using the JIS 00 screwdriver.
Step 9
- Grip the track pad with the tweezers and slide it up and out of the keyboard assembly.
Grip the track pad with the tweezers and slide it up and out of the keyboard assembly.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Lauren Schirle
Member since: 01/24/2019
205 Reputation
2 Guides authored
Badges:
4
+1 more badge
Team
Cal Poly, Team S19-G4, White Winter 2019
Member of Cal Poly, Team S19-G4, White Winter 2019
CPSU-WHITE-W19S19G4
4 Members
12 Guides authored
