Difficulty

Easy

Steps

7

Time Required

                          10 minutes

Sections

2

  • Keyboard
  • 5 steps
  • Touchpad
  • 2 steps

Flags

0

  • BackAsus Chromebook C101P

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Keyboard
  • Flip the Chromebook so that the bottom is facing up.
  • Remove the nine T5 Torx screws.

Flip the Chromebook so that the bottom is facing up.

Remove the nine T5 Torx screws.

1024

Step 2

  • Remove the four rubber grips on the bottom side of the Chromebook using an opening tool.

Remove the four rubber grips on the bottom side of the Chromebook using an opening tool.

Step 3

  • Remove the four black screws where the rubber grips were.

Remove the four black screws where the rubber grips were.

Step 4

  • Reorient the Chromebook so the right side is facing upwards.
  • Wedge an opening tool or spudger between the keyboard (upper case) and the lower case of the bottom portion of the Chromebook.

Reorient the Chromebook so the right side is facing upwards.

Wedge an opening tool or spudger between the keyboard (upper case) and the lower case of the bottom portion of the Chromebook.

Step 5

  • Pull back the black lever on the base of the cable. While pulling back, take your tweezers and pull back on the large ribbon cable.
  • Pull back the black lever on the base of the cable. While pulling back, take your tweezers and pull back on the small ribbon cable.
  • Separate the keyboard from the rest of the laptop.

Pull back the black lever on the base of the cable. While pulling back, take your tweezers and pull back on the large ribbon cable.

Pull back the black lever on the base of the cable. While pulling back, take your tweezers and pull back on the small ribbon cable.

Separate the keyboard from the rest of the laptop.

Step 6

              Touchpad
  • Remove the three Phillips #0 screws holding the trackpad in place.

Remove the three Phillips #0 screws holding the trackpad in place.

Step 7

  • Using tweezers, pull the cable free from the touchpad.
  • Using tweezers, pry off the tape holding the touchpad down.

Using tweezers, pull the cable free from the touchpad.

Using tweezers, pry off the tape holding the touchpad down.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Bryan Acosta

Member since: 10/25/2019

325 Reputation

                                      3 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       UMass Dartmouth, Team S1-G2, O'Connell Fall 2019                        

                                                  Member of UMass Dartmouth, Team S1-G2, O'Connell Fall 2019 



                    UMASSD-O'CONNELL-F19S1G2                     


                                            2 Members                     


                                            5 Guides authored